Share Email Print
cover

Proceedings Paper

Self-adapting monochromator crystal for high heat load wiggler beamlines
Author(s): Horst Schulte-Schrepping; Zhibi Wang; Joachim Heuer
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

In order to utilize the full potential of high power wiggler beam lines with heat loads up to several kW and large white beam cross sections, a variety of monochromator crystal designs are in use. Either the crystal is efficiently cooled or the unwanted distortions are compensated by different means which require external control mechanisms. Based on the self-adapting crystal design developed at the Advanced Photon Source, we present a new Si-monochromator crystal and matching support structure. This design makes use of forces inside the crystal which are generated by the heat load hitting the crystal. The heat load induced distortions of the reflecting surface are compensated by these forces. Finite element calculations are the basis for the tested components. The design of the support structure, which provides the necessary mechanical and thermal boundary conditions to the crystal is shown. The present setup allows to measure and adjust the force between crystal and support.

Paper Details

Date Published: 21 November 1996
PDF: 5 pages
Proc. SPIE 2855, High Heat Flux Engineering III, (21 November 1996); doi: 10.1117/12.259827
Show Author Affiliations
Horst Schulte-Schrepping, Deutsches Elektronen-Synchrotron (Germany)
Zhibi Wang, Argonne National Lab. (United States)
Joachim Heuer, Deutsches Elektronen-Synchrotron (Germany)


Published in SPIE Proceedings Vol. 2855:
High Heat Flux Engineering III
Ali M. Khounsary, Editor(s)

© SPIE. Terms of Use
Back to Top