Share Email Print
cover

Proceedings Paper • new

InAs/AlSb quantum cascade lasers grown on silicon substrates (Conference Presentation)
Author(s): Eric Tournié; Hoang Nguyen Van; Zeineb Loghmari; Laurent Cerutti; Jean-Baptiste Rodriguez; Julie Tournet; Grégoire Narcy; Guilhem Boissier; Gilles Patriarche; Michael Bahriz; Roland Teissier; Alexei N. Baranov
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

Sb-based materials rely on the GaSb, InAs, AlSb, InSb binary compounds and their quaternary or pentanary alloys (AlGaAsSb, GaInAsSb, AlGaInAsSb,.. ). This technology exhibits several distinctive properties as compared to other semiconductors: type-I to type-III band alignments, giant band offsets, low effective masses of electrons and holes, direct bandgaps between 0.15 and 1.7 eV. Conventional laser diodes (LDs) rely essentially on GaInAsSb type-I quantum wells (QWs) confined by AlGa(In)AsSb barrier layers. Low threshold currents and high T0 have been demonstrated between 1.5 and 3.4 µm. The AlGaInAsSb pentanary barrier is needed to extend the wavelength beyond 3 µm while keeping a type-I band alignment [3] even though it makes the epitaxial growth complex. Single mode operation has been achieved with both DFB lasers and VCSELs using the same active zone. At longer wavelength, interband cascade lasers (ICLs) based on GaInSb/InAs type-II p-n junctions stacked in series exhibit room temperature cw emission between 3.5 and 5 µm, including single mode operation of DFB lasers. At still longer wavelength InAs/AlSb quantum cascade lasers (QCLs) benefit from the low InAs effective mass and giant conduction band offset. High performance have been demonstrated all the way from 2.6 µm up to 25 µm, particularly at long wavelength which is an asset of this technology. The evolution toward smart, integrated, sensors requires integrating III-V optoelectronic devices with Si-based platforms. The epitaxial growth of III-V compounds on Si has thus been the focus of renewed attention for about a decade now. We have shown that the Si substrate preparation and the III-Sb nucleation on Si are crucial steps. This allowed us demonstrating a variety of epitaxially integrated optoelectronic devices such as laser diodes, photodetectors and the first ever QCL grown on Si. In this presentation we review the recent results obtained on the integration of antimonide-based QCLs epitaxially grown on Si substrates. We will show that this technology is very attractive for future III-V on Si integration, and we will discuss future integration schemes.

Paper Details

Date Published: 8 March 2019
PDF
Proc. SPIE 10926, Quantum Sensing and Nano Electronics and Photonics XVI, 1092618 (8 March 2019); doi: 10.1117/12.2514551
Show Author Affiliations
Eric Tournié, Univ. de Montpellier (France)
Hoang Nguyen Van, Univ. Montpellier (France)
Zeineb Loghmari, Univ. Montpellier (France)
Laurent Cerutti, Univ. Montpellier (France)
Jean-Baptiste Rodriguez, Univ. Montpellier (France)
Julie Tournet, Univ. Montpellier (France)
Grégoire Narcy, Univ. Montpellier (France)
Guilhem Boissier, Univ. Montpellier (France)
Gilles Patriarche, Ctr. de Nanosciences et de Nanotechnologies, CNRS (France)
Univ. Paris-Sud (France)
Michael Bahriz, Univ. Montpellier (France)
Roland Teissier, Univ. Montpellier (France)
Alexei N. Baranov, Univ. Montpellier (France)


Published in SPIE Proceedings Vol. 10926:
Quantum Sensing and Nano Electronics and Photonics XVI
Manijeh Razeghi, Editor(s)

© SPIE. Terms of Use
Back to Top