Share Email Print
cover

Proceedings Paper • new

Experimental study on grinding glass-ceramic reflector with diamond pellets
Author(s): Weijin Guo; Lipeng Sun; Peng Wang; Yi Tong; Wei Jing; dongxu wu
Format Member Price Non-Member Price
PDF $17.00 $21.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

Different from the abrasive grinding process, diamond particles are solidified in matrix materials and the fixed motion between abrasives and workpieces which good for precision machining, so we take this method to grind glass-ceramic reflector and a good surface quality was obtained by using diamond W14 pellets. Through the grinding process experiment, the material removal rate on the glass-ceramic reflector are measured at the given rotation speed, the pendulum frequency and pressure by W28, W14, W5 pellets. In addition, the surface roughness measurement results show that the surface roughness of 181.6nm can be obtained by using W28 diamond pellets. The experiment also demonstrates that the surface roughness of the glass-ceramic reflector is decrease with changing pellets in a smaller diamond size. After ultra fine grinding processing by using W5 diamond pellets, finally, the optical surface with a roughness of 20.8nm is obtained. The experimental results show that the method of using diamond pellets to process glass-ceramic reflector can replace the traditional abrasive finishing process in rough grinding, fine grinding and superfine grinding.

Paper Details

Date Published: 16 January 2019
PDF: 7 pages
Proc. SPIE 10838, 9th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 108381G (16 January 2019); doi: 10.1117/12.2506251
Show Author Affiliations
Weijin Guo, Tianjin Jinhang Institute of Technical Physics (China)
Lipeng Sun, Tianjin Jinhang Institute of Technical Physics (China)
Peng Wang, Tianjin Jinhang Institute of Technical Physics (China)
Yi Tong, Tianjin Jinhang Institute of Technical Physics (China)
Wei Jing, Tianjin Jinhang Institute of Technical Physics (China)
dongxu wu, Tianjin Jinhang Institute of Technical Physics (China)


Published in SPIE Proceedings Vol. 10838:
9th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies
Xiong Li; William T. Plummer; Bin Fan; Mingbo Pu; Yongjian Wan; Xiangang Luo, Editor(s)

© SPIE. Terms of Use
Back to Top