Share Email Print
cover

Proceedings Paper

Research on the calibration method of reference flat based on gravity deformation
Author(s): Xueliang Zhu; Siwei Zhao; Ailin Tian; Huiying Zhao; Bingcai Liu; Hongjun Wang
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

In high-precision vertical large-caliber flat interferometry, the gravity deformation of the reference flat will lead to a large error of the surface shape measured. Based on the analysis of the finite element method, this paper combines the three flats test method with Zernike polynomial fitting to compensate and calibrate the error of the reference flat. For the diameter of 300 mm and a thickness of 90 mm of the fused silica reference flat, the results of analysis show that the PV deformation under the T-bracing is 0.021 λ. (λ = 632.8nm). The simulation test result of the influence of deformation on the three-flats test shows that the reference flat the gravity deformation not only affects the detection of self surface, but also has a great influence on the surface detection results of the undeformed flat. And the PV of the surface shape detection results residual is close to 0.011λ. In the end, the new calibration method base on compensate reference deformation for three flats test was proposed, and the validity was verified by simulation.

Paper Details

Date Published: 24 July 2018
PDF: 7 pages
Proc. SPIE 10827, Sixth International Conference on Optical and Photonic Engineering (icOPEN 2018), 108272Q (24 July 2018); doi: 10.1117/12.2500464
Show Author Affiliations
Xueliang Zhu, Xi'an Technological Univ. (China)
Siwei Zhao, Xi'an Technological Univ. (China)
Ailin Tian, Xi'an Technological Univ. (China)
Huiying Zhao, Xi'an Technological Univ. (China)
Bingcai Liu, Xi'an Technological Univ. (China)
Hongjun Wang, Xi'an Technological Univ. (China)


Published in SPIE Proceedings Vol. 10827:
Sixth International Conference on Optical and Photonic Engineering (icOPEN 2018)
Yingjie Yu; Chao Zuo; Kemao Qian, Editor(s)

© SPIE. Terms of Use
Back to Top