Share Email Print
cover

Proceedings Paper

DUV resist profile improvement on TiN-deposited metal layer
Author(s): Chia-Hui Lin; Chun-Cho Chen; Jhy-Sayang Jenq; Maaike Op de Beeck; Luc Van den Hove
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

Over the past several years, there have been many publications concerning the sensitivity of chemically amplified (CA) resist to substrate contamination. Resist footing phenomena are found on SiN, BPSG, TiN...etc stack films. Many approaches, such as varying the film thickness, oxide deposition, etc., have been proposed to solve this problem, with the sacrifice of increasing process complexity. In this study, we tried to improve DUV photoresist profile on TiN/AlSiCu/BPSG stacked layers. A positive tone CA resist was used and the improvement was carried out through both thin-film and lithography treatments. Since many process parameters were optimized, Taguchi design-of-experiment method was utilized to save processing cost, time and effort. The results turned out that passivation of TiN with hydrogen can improve resist footing better than either oxygen passivation or no treatment. However, the improvement was less significant than lithography process parameters. It is believed that since HMDS serves as an interlayer between TiN substrate and DUV resist, optimizing dehydration hot baking, post baking and post-exposure baking processes apparently has a more direct and significant impact on resist profile improvement than thin-film treatments. It is suggested that in this specific problem, the optimization of lithographic parameters can result in satisfactory resist profile.

Paper Details

Date Published: 7 June 1996
PDF: 10 pages
Proc. SPIE 2726, Optical Microlithography IX, (7 June 1996); doi: 10.1117/12.240968
Show Author Affiliations
Chia-Hui Lin, Taiwan Semiconductor Manufacturing Co. (Belgium)
Chun-Cho Chen, Winbond Electronics Corp. (Taiwan)
Jhy-Sayang Jenq, United Microelectronics Corp. (Taiwan)
Maaike Op de Beeck, IMEC (Belgium)
Luc Van den Hove, IMEC (Belgium)


Published in SPIE Proceedings Vol. 2726:
Optical Microlithography IX
Gene E. Fuller, Editor(s)

© SPIE. Terms of Use
Back to Top