Share Email Print
cover

Proceedings Paper

Influence of SLM on compressive response of NiTi scaffolds
Author(s): Narges Shayesteh Moghaddam; Soheil Saedi; Amirhesam Amerinatanzi; Ahmadreza Jahadakbar; Ehsan Saghaian; Haluk Karaca; Mohammad Elahinia
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

Porous Nickel-Titanium shape memory alloys (NiTi-SMAs) have attracted much attention in biomedical applications due to their high range of pure elastic deformability (i.e., superelasticity) as well as their bone-level modulus of elasticity (E≈12-20 GPa). In recent years, Selective Laser Melting (SLM) has been used to produce complex NiTi components. The focus of this study is to investigate the superelasticity and compressive properties of SLM NiTi-SMAs. To this aim, several NiTi components with different level of porosities (32- 58%) were fabricated from Ni50.8Ti (at. %) powder via SLM PXM by Phenix/3D Systems, using optimum processing parameter (Laser power-P=250 W, scanning speed-v=1250mm/s, hatch spacing-h=120μm, layer thickness-t=30μm). To tailor the superelasticity behavior at body temperature, the samples were solution annealed and aged for 15 min at 350°C. Then, transformation temperatures (TTs), superelastic response, and cyclic behavior of NiTi samples were studied. As the porosity was increased, the irrecoverable strain was observed to be higher in the samples. At the first superelastic cycle, 3.5%, 3.5%, and 2.7% strain recovery were observed for the porosity levels of 32%, 45%, and 58%, respectively. However, after 10 cycles, the superelastic response of the samples was stabilized and full strain recovery was observed. Finally, the modulus of elasticity of dense SLM NiTi was decreased from 47 GPa to 9 GPa in the first cycle by adding 58% porosity.

Paper Details

Date Published: 22 March 2018
PDF: 7 pages
Proc. SPIE 10596, Behavior and Mechanics of Multifunctional Materials and Composites XII, 105960H (22 March 2018); doi: 10.1117/12.2305251
Show Author Affiliations
Narges Shayesteh Moghaddam, The Univ. of Toledo (United States)
Soheil Saedi, Univ. of Kentucky (United States)
Amirhesam Amerinatanzi, The Univ. of Toledo (United States)
Ahmadreza Jahadakbar, The Univ. of Toledo (United States)
Ehsan Saghaian, Univ. of Kentucky (United States)
Haluk Karaca, Univ. of Kentucky (United States)
Mohammad Elahinia, The Univ. of Toledo (United States)


Published in SPIE Proceedings Vol. 10596:
Behavior and Mechanics of Multifunctional Materials and Composites XII
Hani E. Naguib, Editor(s)

© SPIE. Terms of Use
Back to Top