Share Email Print
cover

Proceedings Paper • Open Access

Advances in SELEX ES infrared detectors for space and astronomy
Author(s): P. Knowles; L. Hipwood; I. Baker; H. Weller

Paper Abstract

Selex ES produces a wide range of infrared detectors from mercury cadmium telluride (MCT) and triglycine sulfate (TGS), and has supplied both materials into space programmes spanning a period of over 40 years. Current development activities that underpin potential future space missions include large format arrays for near- and short-wave infrared (NIR and SWIR) incorporating radiation-hard designs and suppression of glow. Improved heterostructures are aimed at the reduction of dark currents and avalanche photodiodes (APDs), and parallel studies have been undertaken for low-stress MCT array mounts. Much of this development work has been supported by ESA, UK Space, and ESO, and some has been performed in collaboration with the UK Astronomy Technology Centre and E2V.

This paper focuses on MCT heterostructure developments and novel design elements in silicon read-out chips (ROICs). The 2048 x 2048 element, 17um pitch ROIC for ESA’s SWIR array development forms the basis for the largest cooled infrared detector manufactured in Europe. Selex ES MCT is grown by metal organic vapour phase epitaxy (MOVPE), currently on 75mm diameter GaAs substrates. The MCT die size of the SWIR array is 35mm square and only a single array can be printed on the 75mm diameter wafer, utilising only 28% of the wafer area. The situation for 100mm substrates is little better, allowing only 2 arrays and 31% utilisation. However, low cost GaAs substrates are readily available in 150mm diameter and the MCT growth is scalable to this size, offering the real possibility of 6 arrays per wafer with 42% utilisation.

A similar 2k x 2k ROIC is the goal of ESA’s NIR programme, which is currently in phase 2 with a 1k x 1k demonstrator, and a smaller 320 x 256 ROIC (SAPHIRA) has been designed for ESO for the adaptive optics application in the VLT Gravity instrument. All 3 chips have low noise source-follower architecture and are enabled for MCT APD arrays, which have been demonstrated by ESO to be capable of single photon detection. The possibility therefore exists in the near future of demonstrating a photon counting, 2k x 2k SWIR MCT detector manufactured on an affordable wafer scale of 6 arrays per wafer.

Paper Details

Date Published: 17 November 2017
PDF: 7 pages
Proc. SPIE 10563, International Conference on Space Optics — ICSO 2014, 1056312 (17 November 2017); doi: 10.1117/12.2304267
Show Author Affiliations
P. Knowles, Selex ES (United Kingdom)
L. Hipwood, Selex ES (United Kingdom)
I. Baker, Selex ES (United Kingdom)
H. Weller, Selex ES (United Kingdom)


Published in SPIE Proceedings Vol. 10563:
International Conference on Space Optics — ICSO 2014
Zoran Sodnik; Bruno Cugny; Nikos Karafolas, Editor(s)

© SPIE. Terms of Use
Back to Top