Share Email Print
cover

Proceedings Paper • new

Blue 450nm high power semiconductor continuous wave laser bars exceeding rollover output power of 80W
Author(s): H. König; A. Lell; B. Stojetz; M. Ali; C. Eichler; M. Peter; A. Löffler; U. Strauss; M. Baumann; A. Balck; J. Malchus; V. Krause
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

Industrial material processing like cutting or welding of metals is rather energy efficient using direct diode or diode pumped solid state lasers. However, many applications cannot be addressed by established infrared laser technology due to fundamental material properties of the workpiece: For example materials like copper or gold have too low absorption in the near infrared wavelength range to be processed efficiently by use of existing high power laser systems. The huge interest to enable high power kW systems with more suitable wavelengths in the blue spectral range triggered the German funded research project 'BLAULAS': Therein the feasibility and capability of CW operating high power laser bars based on the GaN material system was investigated by Osram and Laserline.

High performance bars were enabled by defeating fundamental challenges like material quality as well as the chip processes, both of which differ significantly from well-known IR laser bars. The research samples were assembled on actively cooled heat sinks with hard solder technology. For the first time an output power of 98W per bar at 60A drive current was achieved. Conversion efficiency as high as 46% at 50W output power was demonstrated.

Paper Details

Date Published: 19 February 2018
PDF: 7 pages
Proc. SPIE 10514, High-Power Diode Laser Technology XVI, 1051402 (19 February 2018); doi: 10.1117/12.2286875
Show Author Affiliations
H. König, OSRAM Opto Semiconductors GmbH (Germany)
A. Lell, OSRAM Opto Semiconductors GmbH (Germany)
B. Stojetz, OSRAM Opto Semiconductors GmbH (Germany)
M. Ali, OSRAM Opto Semiconductors GmbH (Germany)
C. Eichler, OSRAM Opto Semiconductors GmbH (Germany)
M. Peter, OSRAM Opto Semiconductors GmbH (Germany)
A. Löffler, OSRAM Opto Semiconductors GmbH (Germany)
U. Strauss, OSRAM Opto Semiconductors GmbH (Germany)
M. Baumann, Laserline GmbH (Germany)
A. Balck, Laserline GmbH (Germany)
J. Malchus, Laserline GmbH (Germany)
V. Krause, Laserline GmbH (Germany)


Published in SPIE Proceedings Vol. 10514:
High-Power Diode Laser Technology XVI
Mark S. Zediker, Editor(s)

© SPIE. Terms of Use
Back to Top