Share Email Print
cover

Proceedings Paper • new

Challenges to realize the EUV-FEL high-power light source for HVM system (Conference Presentation)
Author(s): Hiroshi Kawata; Norio Nakamura; Eiji Kako; Ryukou Kato; Tsukasa Miyajima

Paper Abstract

It is important to develop the high power EUV light source up to 1 kW to realize the 3nm node, which is expected to be in production at 2023-24. To this end, an energy recovery linac (ERL)-based free electron laser (FEL) must be a most promising candidate, so that our group has done some feasibility studies from the view point of accelerator technology. In order to realize the EUV-FEL high power light source, it is also important to recognize the demand of end users and related problems on the FEL light source. Last year, we attended many conferences and workshops to learn these items and also we organized one day workshop “EUV-FEL Workshop” at Tokyo. You can find the presentation materials in a website of http://pfwww.kek.jp/PEARL/EUV-FEL_Workshop/presentaions.html. One of the most important requirements is to reduce the size of the EUV-FEL system. The total system size is about 200 m (L).x 20 m (W) at our current design of the EUV-FEL with 160m linac, where the acceleration energy and current are 800 MeV and 10 mA, respectively. However, we had comments from semiconductor industry that it is too long to install the light source in a usual LSI Fab, so that we have to find out solutions to reduce the length of the accelerator systems to ~100 m. To this end, there are following several challenges. 1) Increasing the field gradient of the superconducting RF (SRF) cavity to reduce the total length of the linac. 2) Higher Q to reduce the RF loss in higher field gradient SRF cavity. 3) Reduction of the acceleration energy by introducing shorter period undulator . 4) Double loop accelerator system, in which the electron passes through a same linac twice and accelerated up to twice energy or accelerating cavities are placed on both loop sides. The R&D directions of the above challenges on accelerator technologies will be presented.

Paper Details

Date Published: 16 October 2017
PDF
Proc. SPIE 10450, International Conference on Extreme Ultraviolet Lithography 2017, 1045010 (16 October 2017); doi: 10.1117/12.2280507
Show Author Affiliations
Hiroshi Kawata, High Energy Accelerator Research Organization, KEK (Japan)
Norio Nakamura, High Energy Accelerator Research Organization, KEK (Japan)
Eiji Kako, High Energy Accelerator Research Organization, KEK (Japan)
Ryukou Kato, High Energy Accelerator Research Organization, KEK (Japan)
Tsukasa Miyajima, High Energy Accelerator Research Organization, KEK (Japan)


Published in SPIE Proceedings Vol. 10450:
International Conference on Extreme Ultraviolet Lithography 2017
Paolo A. Gargini; Patrick P. Naulleau; Kurt G. Ronse; Toshiro Itani, Editor(s)

© SPIE. Terms of Use
Back to Top