Share Email Print
cover

Proceedings Paper • new

New developments in laboratory-based x-ray sources and optics
Author(s): Bernd Hasse; Jenss Schmidt-May; Frank Hertlein; Paul Radcliffe; Carsten Michaelsen
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

Many applications in the field of X-ray analytics require an X-ray beam with a high flux density at the sample position. Examples for these applications are single crystal diffraction or micro-diffraction to name but a few. An X-ray system comprising of an X-ray source with a small electron beam spot size combined with a diffracting 2-dimensional multilayer mirror is the ideal source for these applications. The mirror collects many photons from the small source, especially when it is mounted as close to the source as possible.

To achieve the goal of a high flux density the spot size on the anode of the X-ray tube should be as small as possible with a simultaneous increase of the X-ray power. A risk is the melting of the anode due to weak heat dissipation. At the same time the figure error of the multilayer mirror should be as low as possible. Large figure errors will increase the spot size of the X-ray beam at the sample position.

Paper Details

Date Published: 23 August 2017
PDF: 8 pages
Proc. SPIE 10387, Advances in Laboratory-based X-Ray Sources, Optics, and Applications VI, 103870B (23 August 2017); doi: 10.1117/12.2277608
Show Author Affiliations
Bernd Hasse, Incoatec GmbH (Germany)
Jenss Schmidt-May, Incoatec GmbH (Germany)
Frank Hertlein, Incoatec GmbH (Germany)
Paul Radcliffe, Incoatec GmbH (Germany)
Carsten Michaelsen, Incoatec GmbH (Germany)


Published in SPIE Proceedings Vol. 10387:
Advances in Laboratory-based X-Ray Sources, Optics, and Applications VI
Ali M. Khounsary; Giovanni Pareschi, Editor(s)

© SPIE. Terms of Use
Back to Top