Share Email Print
cover

Proceedings Paper

REAL cooled mirror for FEL application: FEA modelling and wavefront propagation simulation (Conference Presentation)
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

To preserve the full coherence of the FEL, the acceptance of the optics should be at least 2*FWHM of the X-ray beam. The LCLS-II soft X-ray experiments cover a photon energy range from 250 eV to 1300 eV. The photon beam footprint on the flat and KB mirrors varies from 150 mm to 1000 mm. The length of the mirror is chosen as 1 meter. Resistive Element Adjustable Length (REAL) cooling technique has been proposed to minimize the thermal deformation [1] for LCLS-II mirrors when the power FEL is above 200 W. The water cooling of the mirror is applied on the top-up-side [2]. The additional electric heater is adjustable both in length and power density to cope with the variable X-ray beam footprint length. A R&D project including the prototype of this REAL cooling technique is funded by DoE for FY2017 & FY2018. In this paper, we will present the modeling results of this REAL cooled prototype mirror. The two parameters of the electric heater (length and power density) are optimized for the thermal deformation minimization of the mirror Finite Element Analysis (FEA) with ANSYS. This optimization of two parameters within ANSYS is not straight forward and necessity large number of FEA calculations. SRW software is used for the wavefront propagation simulation to compare the performance of REAL cooled mirror with other frequently used cooling techniques. 1. Zhang L., Cocco D., Kelez N., Morton D.S., Srinivasan V. and Stefan P.M. - Optimizing X-ray mirror thermal performance using matched profile cooling, J. Synchrotron Rad. (2015). 22,1170–1181, doi: 10.1107/S1600577515013090 2. Zhang L. , Barrett R. , Friedrich K. , Glatzel P. , Mairs T. , Marion P. , Monaco G. , Morawe C. , Weng T. - Thermal distortion minimization by geometry optimization for water-cooled white beam mirror or multilayer optics, Journal of Physics : Conference Series 425, 052029-1-052029-4 (2013)

Paper Details

Date Published: 19 September 2017
PDF
Proc. SPIE 10386, Advances in X-Ray/EUV Optics and Components XII, 103860H (19 September 2017); doi: 10.1117/12.2274593
Show Author Affiliations
Lin Zhang, SLAC National Accelerator Lab. (United States)
Corey L. Hardin, SLAC National Accelerator Lab. (United States)
Daniele Cocco, SLAC National Accelerator Lab. (United States)


Published in SPIE Proceedings Vol. 10386:
Advances in X-Ray/EUV Optics and Components XII
Christian Morawe; Ali M. Khounsary; Shunji Goto, Editor(s)

© SPIE. Terms of Use
Back to Top