Share Email Print
cover

Proceedings Paper

The effect of dressing parameters on the chip loading and ground surface quality by using grinding pins and grinding wheels with very fine grits
Author(s): Mohammadali Kadivar; Heike Kitzig-Frank; Bahman Azarhoushang
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

Dressing as an integrated part of the grinding process influences the quality of ground surface and the loading of the grinding tool. This paper addresses the effect of dressing parameters, including the different dressing overlapping ratios (severely high values) and dressing speed ratios (up and down dressing modes) on the chip loading and surface finish in the grinding with micro-pins and grinding wheels with very fine grits. The results revealed that both the ground surface quality and chip loading are significantly influenced by the grinding tool topography which is generated by the dressing process. The very high dressing overlapping ratios generated a fine topography on the grinding tool, which resulted in lower chip loading and finer surface finish. Moreover, both chip nests and welded clogging on the grinding grains were observed. More welded clogging of the grinding pin was detected when the dressing overlapping ratio decreased and down dressing mode was applied. Mirror surface quality (Ra=0.035) was achieved with utilizing overlapping ratios up to 60 for a grinding wheel with grits size #500.

Paper Details

Date Published: 15 June 2017
PDF: 7 pages
Proc. SPIE 10326, Fourth European Seminar on Precision Optics Manufacturing, 103260E (15 June 2017); doi: 10.1117/12.2272167
Show Author Affiliations
Mohammadali Kadivar, Furtwangen Univ. of Applied Sciences (Germany)
Heike Kitzig-Frank, Furtwangen Univ. of Applied Sciences (Germany)
Bahman Azarhoushang, Furtwangen Univ. of Applied Sciences (Germany)


Published in SPIE Proceedings Vol. 10326:
Fourth European Seminar on Precision Optics Manufacturing
Oliver W. Fähnle; Rolf Rascher; Christine Wünsche, Editor(s)

© SPIE. Terms of Use
Back to Top