Share Email Print
cover

Proceedings Paper

The research progress of large-aperture fused silica for high power laser
Author(s): Zhufeng Shao; Yufen Wang; Zaikui Xiang; Chuandong Rao
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

Because of its excellent optical performance, the fused silica is widely used in laser industry. In addition, the fused silica can withstand high power laser, due to its pure component, and the performance is most outstanding within all types of glasses. So fused silica can be used for optical lens in high power laser field.

From the manufacturing process stand point, the fused silica can be categorized to four types: type Ⅰ, type Ⅱ, type Ⅲ, and type Ⅳ. The fused silica of type Ⅰand type Ⅱ is made through melting silica sand in graphite furnace or oxyhydrogen flame. There are many defects in these types of fused silica, for example, the air bubbles, inclusions and metallic impurity. The other two types are made by synthetic reaction of SiCl4 with water in oxyhydrogen or plasma flame. Both type Ⅲ and Ⅳ have excellent performance in transmittance and internal quality. However, type Ⅳof fused silica has disadvantage in small aperture and overall high manufacturing cost.

Take the transmittance and internal quality into consideration, the type Ⅲ fused silica is the most suitable for large-aperture lens, and can withstand high power laser. The systemic studies of manufacturing process were done to improve the performance of type Ⅲ fused silica in various areas, for instance, the optical homogeneity, the stress birefringence, the absorption coefficient and the damage threshold. There are four steps in manufacturing process of type Ⅲ fused silica, ingot production, reshaping, annealing and cold-working. The critical factors of ingot production, like the flame of burner and the structure of furnace, were deeply studied in this paper to improve the performance of fused silica.

On the basis of the above research, the performance and quality of the fused silica measured up to advanced world levels. For instance, the result of optical homogeneity can be controlled to 2~5 ppm, the stress birefringence is better than 4 nm/cm, the absorption coefficient is about 5.971ppm cm-1 (1ω), the damage threshold is greater than 80, 25 and 23 J/cm2 with the wavelength at 1064, 532 and 351nm respectively, the bandwidth used for measuring is 3ns.The fused silica has already been used in the area of high power laser facilities, aerospace industry, primary lens of interferometer based on its excellent performance.

Paper Details

Date Published: 8 March 2017
PDF: 7 pages
Proc. SPIE 10255, Selected Papers of the Chinese Society for Optical Engineering Conferences held October and November 2016, 102551D (8 March 2017); doi: 10.1117/12.2267458
Show Author Affiliations
Zhufeng Shao, China Building Materials Academy (China)
Yufen Wang, China Building Materials Academy (China)
Zaikui Xiang, China Building Materials Academy (China)
Chuandong Rao, China Building Materials Academy (China)


Published in SPIE Proceedings Vol. 10255:
Selected Papers of the Chinese Society for Optical Engineering Conferences held October and November 2016
Yueguang Lv; Jialing Le; Hesheng Chen; Jianyu Wang; Jianda Shao, Editor(s)

© SPIE. Terms of Use
Back to Top