Share Email Print
cover

Proceedings Paper

Design, analysis, and fabrication of a piezoelectric force plate
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

Force plates are used to detect static and dynamic reaction forces due to presence of stationary or moving objects as well as the location of applied forces. The application of force plates in various biomechanical fields, such as gait analysis, has been widely suggested and investigated in the past. Several sensor technologies like piezoelectrics, capacitance gauges, and piezoresistive sensors are utilized to develop force plates with special characteristics. Among the technologies employed in force plate designs, piezoelectrics present the ability of providing a self-powered sensory system. Recently, it has been suggested to implement piezoelectric transducers as sensors in the tibial bearing of total knee replacement (TKR) implants in order to transform the knee bearing into a force plate with the ability to detect force and contact point location for in vivo knee load analysis. Considering this application, a simplified design of a force plate instrumented with six piezoelectric transducers is presented in this study. The force plate is modeled using a finite element (FE) model to investigate the sensing performance of the system. In order to validate the simulation, a prototype force plate is fabricated and tested under the same loading condition applied on the FE model. The results are presented in terms of measured location and amplitude of applied force measured by the piezoelectric transducers. For the FE simulation, the deviation of the measured location of the applied force from the actual location is obtained as 0.62 mm in the x-direction and 0.13 mm in the y-direction, and the error in the amplitude of the measured force is 0.03% of the applied force. On the other hand, the deviation in the measured location of the force from the experimental test is 0.53 mm in the x-direction and 0.1 mm in the y-direction, while the error in force is 3.6% of the applied force. The small quantities of error in both sensed location and amplitude of applied force obtained from the FE simulation and experimental test results demonstrates the potential of the proposed design to be utilized as the sensor in the knee bearing of TKR implants.

Paper Details

Date Published: 5 April 2017
PDF: 11 pages
Proc. SPIE 10170, Health Monitoring of Structural and Biological Systems 2017, 101700W (5 April 2017); doi: 10.1117/12.2260381
Show Author Affiliations
Elias Hoummadi, Tennessee Technological Univ. (United States)
Mohsen Safaei, Tennessee Technological Univ. (United States)
Steven R. Anton, Tennessee Technological Univ. (United States)


Published in SPIE Proceedings Vol. 10170:
Health Monitoring of Structural and Biological Systems 2017
Tribikram Kundu, Editor(s)

© SPIE. Terms of Use
Back to Top