Share Email Print
cover

Proceedings Paper

Ultra-short pulse laser micro patterning with highest throughput by utilization of a novel multi-beam processing head
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

In the last decade much improvement has been achieved for ultra-short pulse lasers with high repetition rates. This laser technology has vastly matured so that it entered a manifold of industrial applications recently compared to mainly scientific use in the past. Compared to ns-pulse ablation ultra-short pulses in the ps- or even fs regime lead to still colder ablation and further reduced heat-affected zones. This is crucial for micro patterning when structure sizes are getting smaller and requirements are getting stronger at the same time. An additional advantage of ultra-fast processing is its applicability to a large variety of materials, e.g. metals and several high bandgap materials like glass and ceramics.

One challenge for ultra-fast micro machining is throughput. The operational capacity of these processes can be maximized by increasing the scan rate or the number of beams – parallel processing. This contribution focuses on process parallelism of ultra-short pulsed lasers with high repetition rate and individually addressable acousto-optical beam modulation. The core of the multi-beam generation is a smooth diffractive beam splitter component with high uniform spots and negligible loss, and a prismatic array compressor to match beam size and pitch. The optical design and the practical realization of an 8 beam processing head in combination with a high average power single mode ultra-short pulsed laser source are presented as well as the currently on-going and promising laboratory research and micro machining results. Finally, an outlook of scaling the processing head to several tens of beams is given.

Paper Details

Date Published: 17 February 2017
PDF: 13 pages
Proc. SPIE 10092, Laser-based Micro- and Nanoprocessing XI, 100921C (17 February 2017); doi: 10.1117/12.2255707
Show Author Affiliations
Oliver Homburg, LIMO Lissotschenko Mikrooptik GmbH (Germany)
Manfred Jarczynski, LIMO Lissotschenko Mikrooptik GmbH (Germany)
Thomas Mitra, LIMO Lissotschenko Mikrooptik GmbH (Germany)
Stephan Brüning, Schepers GmbH & Co. KG (Germany)


Published in SPIE Proceedings Vol. 10092:
Laser-based Micro- and Nanoprocessing XI
Udo Klotzbach; Kunihiko Washio; Rainer Kling, Editor(s)

© SPIE. Terms of Use
Back to Top