Share Email Print
cover

Proceedings Paper

Influence of temperature on Yb:YAG/Cr:YAG microchip laser operation
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

The goal of this work was an investigation of the temperature influence (in range from 80 up to 320 K) on the laser properties of Yb:YAG/Cr:YAG Q-switched diode-pumped microchip laser. This laser was based on monolith crystal (diameter 3mm) which combines in one piece an active laser part (Yb:YAG crystal, 10 at.% Yb/Y, 3mm long) and saturable absorber (Cr:YAG crystal, 1.36mm long, initial transmission 90% @ 1031 nm). The laser resonator pump mirror (HT for pump radiation, HR for generated radiation) was directly deposited on the Yb:YAG monolith part. The output coupler with reflection 55% for the generated wavelength was placed on the Cr:YAG part. The microchip laser was placed in the temperature controlled cupreous holder inside vacuum chamber of the liquid nitrogen cryostat. For Yb:YAG part longitudinal pulsed pumping (pumping pulse length 2.5 ms, rep-rate 20 Hz, power amplitude 21W) a fibre coupled (core diameter 400 μm, NA= 0:22) laser diode, operating at wavelength 933 nm, was used. The microchip laser mean output power, pulse duration, repetition rate, emission wavelength, and laser beam profile were measured in dependence on temperature. The generated pulse length was in range from 2.2 ns to 1.1 ns (FWHM) with the minimum at 230 K. The single pulse energy was peaking (0.4 mJ) at 180 K. The highest peak power (325 kW) was obtained at 220 K. The highest pulse repetition rate (38 kHz) and output mean power (370mW) was reached for temperature 80 K.

Paper Details

Date Published: 17 February 2017
PDF: 8 pages
Proc. SPIE 10082, Solid State Lasers XXVI: Technology and Devices, 1008222 (17 February 2017); doi: 10.1117/12.2252003
Show Author Affiliations
Jan Šulc, Czech Technical Univ. in Prague (Czech Republic)
Jan Eisenschreiber, Czech Technical Univ. in Prague (Czech Republic)
Helena Jelínková, Czech Technical Univ. in Prague (Czech Republic)
Karel Nejezchleb, Crytur, Ltd. (Czech Republic)
Václav Škoda, Crytur, Ltd. (Czech Republic)


Published in SPIE Proceedings Vol. 10082:
Solid State Lasers XXVI: Technology and Devices
W. Andrew Clarkson; Ramesh K. Shori, Editor(s)

© SPIE. Terms of Use
Back to Top