Share Email Print
cover

Proceedings Paper

High-power optical parametric frequency converters with addressable wavelengths in the infrared
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

Based on established short pulse lasers with an output wavelength around 1 μm optical parametric frequency converters open up the spectral range between 1.4 and 4.0 μm for the first time in a power range of interest to laser material processing. The systems can be flexibly adapted as regards wavelength, pulse parameters and spectral properties to the requirements of various applications.

We will discuss technical implementation and characterization of different optical parametric generators (OPG) based on periodically poled Lithium Niobate (PPLN) to show the parameter flexibility of this approach as well as current technical limits. Actual design examples will address output wavelengths between 1.6 μm and 3.4 μm with output powers ranging from several watts to tens of watts. The pulse parameters of these lasers range from a pulse duration of 9 ps with a repetition rate of 86 MHz to 1.5 ns and 100 kHz.

The spectral bandwidth of the OPG examined can be very large. In particular, spectral bandwidths of about 100 nm are measured at the degenerated point, where the output wavelength is equal to twice the pump wavelength. Even beyond this point, a spectrum of typically a few tens of nanometers width generally accompanies a large conversion efficiency (>50 %). For applications that require a narrower spectrum, the OPG can be operated in a seeded mode, where only a few milliwatts of power from a continuously emitting laser diode are sufficient to seed a pulsed high power OPG efficiently and reduce the bandwidth to few nanometers.

Paper Details

Date Published: 17 February 2017
PDF: 6 pages
Proc. SPIE 10082, Solid State Lasers XXVI: Technology and Devices, 100820O (17 February 2017); doi: 10.1117/12.2250942
Show Author Affiliations
B. Jungbluth, Fraunhofer-Institute for Laser Technology (Germany)
F. Elsen, Fraunhofer-Institute for Laser Technology (Germany)
J. Wueppen, Fraunhofer-Institute for Laser Technology (Germany)
S. Nyga, Fraunhofer-Institute for Laser Technology (Germany)
M. Strotkamp, Fraunhofer-Institute for Laser Technology (Germany)
D. Hoffmann, Fraunhofer-Institute for Laser Technology (Germany)
R. Poprawe, Fraunhofer-Institute for Laser Technology (Germany)
RWTH Aachen Univ. (Germany)


Published in SPIE Proceedings Vol. 10082:
Solid State Lasers XXVI: Technology and Devices
W. Andrew Clarkson; Ramesh K. Shori, Editor(s)

© SPIE. Terms of Use
Back to Top