Share Email Print
cover

Proceedings Paper

Development of 100W class blue direct diode laser coating system for laser metal deposition
Author(s): R. Higashino; M. Tsukamoto; Y. Sato; N. Abe; K. Asano; Y. Funada
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

Laser cladding technique is widely used for industrial application such as oil, energy industry, and aircraft and so on because it is able to repair and to form a near net shape. This process have been employed infrared lasers with wavelength of 0.8-10.6μm since output power of these lasers have over 1000W. Metal processing efficiency was, however, low in these wavelength, because the absorption was low. Thus, we developed the laser cladding system with blue direct diode laser at the wavelength of 445nm. 6 blue diode lasers was combined on the focusing spot to reach the output power of 100W by a lens, which one blue diode laser module was maximum output power of 20W. By using this laser cladding system, a pure copper film coating on a SUS304 stainless steel plate was demonstrated from a copper powder. As the result, the copper layer was formed on SUS304 stainless steel plate at the width of 322μm and thickness of 534μm was formed on the substrate.

Paper Details

Date Published: 24 February 2017
PDF: 4 pages
Proc. SPIE 10095, Laser 3D Manufacturing IV, 100950X (24 February 2017); doi: 10.1117/12.2250263
Show Author Affiliations
R. Higashino, Joining and Welding Research institute, Osaka Univ. (Japan)
M. Tsukamoto, Joining and Welding Research institute, Osaka Univ. (Japan)
Y. Sato, Joining and Welding Research institute, Osaka Univ. (Japan)
N. Abe, Joining and Welding Research institute, Osaka Univ. (Japan)
K. Asano, Joining and Welding Research institute, Osaka Univ. (Japan)
Y. Funada, Industrial Research Institute of Ishikawa (Japan)


Published in SPIE Proceedings Vol. 10095:
Laser 3D Manufacturing IV
Bo Gu; Henry Helvajian; Alberto Piqué; Corey M. Dunsky; Jian Liu, Editor(s)

© SPIE. Terms of Use
Back to Top