Share Email Print
cover

Proceedings Paper

Design, assembly, and metrology of an oil-immersion microscope objective with long working distance
Author(s): Wei-Jei Peng; Wen-Lung Lin; Hui-Jean Kuo; Cheng-Fang Ho; Wei-Yao Hsu
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

The design, tolerance sensitivity reduction, assembly, and optical bench test for an oil-immersion microscope objective with long working distance employed in a lattice light-sheet microscope is presented in this paper. In this application, the orthogonal excitation and detection objectives are dipped in an oil medium. The excitation objective focuses the incident laser beam to generate fluorescence on specimen for collecting by detection objective. The excitation objective is custom-designed to meet the requirement specification such as oil-immersion, the long working distance, and numerical aperture (NA) of 0.5, etc. To produce an acceptable point spread function (PSF) for effective excitation, the performance of the objective needs to be close to diffraction limit. Because the tolerance of the modulation transfer function (MTF) is more and more sensitive at higher spatial frequency, it is extremely critical to keep the performance after manufacture. Consequently, an insensitive optical design is very important for relaxing tolerance. We compare the design with and without tolerance sensitivity reduction, and the as-built MTF shows the result. Furthermore, the method for sensitivity reduction is presented. The opto-mechanical design and assembly method are also discussed. Eventually, the objective with five spherical lenses was fabricated. In optical bench test, the depth of the oil is sensitive to MTF, and it leads to the complicated adjustment. For solving this issue, we made an index-matching lens to replace oil for measurement easily. Finally, the measured MTF of the excitation objective can accomplish the requirement specification and successfully employed in a lattice light-sheet microscope.

Paper Details

Date Published: 31 October 2016
PDF: 9 pages
Proc. SPIE 10021, Optical Design and Testing VII, 100211N (31 October 2016); doi: 10.1117/12.2246254
Show Author Affiliations
Wei-Jei Peng, Instrument Technology Research Ctr. (Taiwan)
Wen-Lung Lin, Instrument Technology Research Ctr. (Taiwan)
Hui-Jean Kuo, Instrument Technology Research Ctr. (Taiwan)
Cheng-Fang Ho, Instrument Technology Research Ctr. (Taiwan)
Wei-Yao Hsu, Instrument Technology Research Ctr. (Taiwan)


Published in SPIE Proceedings Vol. 10021:
Optical Design and Testing VII
Yongtian Wang; Tina E. Kidger; Kimio Tatsuno, Editor(s)

© SPIE. Terms of Use
Back to Top