Share Email Print
cover

Proceedings Paper

Heat transfer within a flat micro heat pipe with extra liquid
Author(s): Silviu Sprinceana; Ioan Mihai
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

In the real functioning of flat micro heat pipe (FMHP), there can appear cases when the temperature from the vaporization zone can exceed a critical value caused by a sudden increase of the thermal flow. The heat transfer which is completed conductively through the copper wall of a FMHP vaporizer causes the vaporization of the work fluid. On the condenser, the condensation of the fluid vapors and the transfer of the condenser to the vaporizer can no longer be achieved. The solution proposed for enhancing heat transfer in the event of blockage phenomenon FMHP, it is the injection of a certain amount of working fluid in the vaporization zone. By this process the working fluid injected into the evaporator passes suddenly in the vapor, producing a cooling zone. The new product additional mass of vapor will leave the vaporization zone and will condense in condensation zone, thereby supplementing the amount of condensation. Thus resumes normal operating cycle of FMHP. For the experimental measurements made for the transfer of heat through the FMHP working fluid demineralized water, they were made two micro-capillary tubes of sintered copper layer. The first was filled with 1ml of demineralized water was dropped under vacuum until the internal pressure has reached a level of 1∙104Pa. The second FMHP was filled with the same amount of working fluid was used and the same capillary inner layer over which was laid a polysynthetic material that will accrue an additional amount of fluid. In this case, the internal pressure was reduced to 1∙104Pa.

Paper Details

Date Published: 14 December 2016
PDF: 6 pages
Proc. SPIE 10010, Advanced Topics in Optoelectronics, Microelectronics, and Nanotechnologies VIII, 100101Q (14 December 2016); doi: 10.1117/12.2243151
Show Author Affiliations
Silviu Sprinceana, Stefan cel Mare Univ. of Suceava (Romania)
Ioan Mihai, Stefan cel Mare Univ. of Suceava (Romania)


Published in SPIE Proceedings Vol. 10010:
Advanced Topics in Optoelectronics, Microelectronics, and Nanotechnologies VIII
Marian Vladescu; Cornel T. Panait; Razvan Tamas; George Caruntu; Ionica Cristea, Editor(s)

© SPIE. Terms of Use
Back to Top