Share Email Print
cover

Proceedings Paper

The effect of structural coefficient on stiffness and deformation of hydrostatic guideway
Author(s): Zhifeng Lai; Zheng Qiao; Peng Zhang; Bo Wang; Yangong Wu
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

Hydrostatic guideway has been widely used for ultra-precision machine tools due to its high stiffness and motion accuracy. In order to optimize the stiffness and motion accuracy of hydrostatic guideway, the effect of different diameters orifice restrictors on the stiffness and deformation of hydrostatic guideway is investigated in detail in this paper. The theoretically optimal structural coefficient is verified through the experiments. Hydrostatic guideway can obtain the maximum stiffness when the value of optimal structural coefficient is 0.707. And changing the diameter of orifice restrictors is an effective method to adjusting the structural coefficient. Due to the error caused by manufacture and assembly of hydrostatic guideway, the optimal structural coefficient is hard to be obtained accurately. Based on this condition, a larger structural coefficient is adopted to reduce the oil pressure in the pocket of hydrostatic guideway effectively, so that the deformation of guideway can be reduced. And finally, the stiffness loss caused by the deformation decreased. In addition, the experimental results show that the maximum deformation of hydrostatic guideway can be reduced from 2.06μm to 1.82μm and the stiffness arise from 1453N/μm to 1855N/μm when orifice restrictors with 0.15mm diameter are used rather than 0.2mm diameter.

Paper Details

Date Published: 25 October 2016
PDF: 6 pages
Proc. SPIE 9685, 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Design, Manufacturing, and Testing of Micro- and Nano-Optical Devices and Systems; and Smart Structures and Materials, 968509 (25 October 2016); doi: 10.1117/12.2242284
Show Author Affiliations
Zhifeng Lai, Harbin Institute of Technology (China)
Zheng Qiao, Harbin Institute of Technology (China)
Peng Zhang, Harbin Institute of Technology (China)
Bo Wang, Harbin Institute of Technology (China)
Yangong Wu, Harbin Institute of Technology (China)


Published in SPIE Proceedings Vol. 9685:
8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Design, Manufacturing, and Testing of Micro- and Nano-Optical Devices and Systems; and Smart Structures and Materials
Xiangang Luo; Tianchun Ye; Tingwen Xin; Song Hu; Minghui Hong; Min Gu, Editor(s)

© SPIE. Terms of Use
Back to Top