Share Email Print
cover

Proceedings Paper

The improvement of laser induced damage resistance of optical workpiece surface by hydrodynamic effect polishing
Author(s): Wenqiang Peng; Chaoliang Guan; Shengyi Li; Zhuo Wang
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

Surface and subsurface damage in optical element will greatly decrease the laser induced damage threshold (LIDT) in the intense laser optical system. Processing damage on the workpiece surface can be inevitably caused when the material is removed in brittle or plastic mode. As a non-contact polishing technology, hydrodynamic effect polishing (HEP) shows very good performance on generating an ultra-smooth surface without damage. The material is removed by chemisorption between nanoparticle and workpiece surface in the elastic mode in HEP. The subsurface damage and surface scratches can be effectively removed after the polishing process. Meanwhile ultra-smooth surface with atomic level surface roughness can be achieved. To investigate the improvement of LIDT of optical workpiece, polishing experiment was conducted on a magnetorheological finishing (MRF) silica glass sample. AFM measurement results show that all the MRF directional plastic marks have been removed clearly and the root-mean-square (rms) surface roughness has decreased from 0.673nm to 0.177nm after HEP process. Laser induced damage experiment was conducted with laser pulse of 1064nm wavelength and 10ns time width. Compared with the original state, the LEDT of the silica glass sample polished by HEP has increased from 29.78J/cm2 to 45.47J/cm2. It demonstrates that LIDT of optical element treated by HEP can be greatly improved for ultra low surface roughness and nearly defect-free surface/subsurface.

Paper Details

Date Published: 28 October 2016
PDF: 6 pages
Proc. SPIE 9683, 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 968315 (28 October 2016); doi: 10.1117/12.2241774
Show Author Affiliations
Wenqiang Peng, National Univ. of Defense Technology (China)
Chaoliang Guan, National Univ. of Defense Technology (China)
Shengyi Li, National Univ. of Defense Technology (China)
Zhuo Wang, National Univ. of Defense Technology (China)


Published in SPIE Proceedings Vol. 9683:
8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies
Wenhan Jiang; Li Yang; Oltmann Riemer; Shengyi Li; Yongjian Wan, Editor(s)

© SPIE. Terms of Use
Back to Top