Share Email Print
cover

Proceedings Paper

Combination process of diamond machining and roll-to-roll UV-replication for thin film micro- and nanostructures
Author(s): J. Väyrynen; K. Mönkkönen; S. Siitonen
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

Roll-to-roll (R2R) ultraviolet (UV) curable embossing replication process is a highly accurate and cost effective way to replicate large quantities of thin film polymer parts. These structures can be used for microfluidics, LED-optics, light guides, displays, cameras, diffusers, decorative, laser sensing and measuring devices. In the R2R UV-process, plastic thin film coated with UV-curable lacquer, passes through an imprinting embossing drum and is then hardened by an UV-lamp. One key element for mastering this process is the ability to manufacture a rotating drum containing micro- and nanostructures. Depending on the pattern shapes, the drum can be directly machined by diamond machining or it can be done through wafer level lithographical process. Due to the shrinkage of UV-curable lacquer, the R2R drum pattern process needs to be prototyped few times, in order to get the desired performance and shape from the R2R produced part. To speed up the prototyping and overall process we have developed a combination process where planar diamond machining patterns are being turned into a drum roller. Initially diamond machined patterns from a planar surface are replicated on a polymer sheet using UV-replication. Secondly, a nickel stamper shim is grown form the polymer sheet and at the end the stamper is turned into a roller and used in the R2R process. This process allows various micro milled, turned, grooved and ruled structures to be made at thin film products through the R2R process. In this paper, the process flow and examples of fabricating R2R embossed UVcurable thin film micro- and nanostructures from planar diamond machined patterns, is reported.

Paper Details

Date Published: 27 September 2016
PDF: 16 pages
Proc. SPIE 9949, Polymer Optics and Molded Glass Optics: Design, Fabrication, and Materials 2016, 99490J (27 September 2016); doi: 10.1117/12.2237739
Show Author Affiliations
J. Väyrynen, Karelia Univ. of Applied Sciences (Finland)
K. Mönkkönen, Karelia Univ. of Applied Sciences (Finland)
S. Siitonen, Nanocomp Ltd. (Finland)


Published in SPIE Proceedings Vol. 9949:
Polymer Optics and Molded Glass Optics: Design, Fabrication, and Materials 2016
David H. Krevor; William S. Beich; Michael P. Schaub; Alan Symmons, Editor(s)

Video Presentation

Combination-process-of-diamond-machining-and-roll-to-roll-UV



© SPIE. Terms of Use
Back to Top