Share Email Print
cover

Proceedings Paper

Design and analysis of the NFIRAOS thermal optics enclosure
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

The Narrow Field InfraRed Adaptive Optics System (NFIRAOS) will be the first-light facility adaptive optics system for the Thirty Meter Telescope (TMT). In order to meet the optical performance and stability specifications essential to leveraging the extraordinary capabilities of the TMT, all of the optical components within NFIRAOS will be protected within a large thermally-controlled optics enclosure (ENCL). Among the many functions performed by the ENCL, the most critical functions include providing a highly stable, light-tight, cold, dry environment maintained at 243±0.5 K for the NFIRAOS opto-mechanical sub-systems and supporting TABL structure. Although the performance of the ENCL during the science operation of NFIRAOS is critical, the maximum thermal loading will be defined by the cooldown/ warm-up cycle which must be accomplished within a time-frame that will minimize the on-sky operational impact due to daytime maintenance work. This study describes the thermal/mechanical design development and supporting analyses (analytical and finite element analyses (FEA)) completed during the preliminary design phase and through the current progression of the ENCL final design phase. The walls of the ENCL consist of interlocking, multilayered, thermally insulated panels, which are supported by an externally located structural framework which attaches to the NFIRAOS Instrument Support Structure. The regulation of the interior ENCL wall surface temperature to within ±0.5 K requires that the heat flux into the interior of NFIRAOS be eliminated by cooling a thermal conduction plate embedded between multiple layers of insulation. The thermal design of the enclosure was evaluated for both steady-state (SS) performance and transient performance (cool-down and warm-up cycles). The transient analysis utilizes a hybrid of a one-dimensional thermal network approach combined with three-dimensional conjugate heat transfer analyses of explicit opto-mechanical components within the ENCL. Many design-parameter combinations were evaluated to determine the performance impact of cooling power and transient temperature profiles. The results derived from the analyses of these design iterations indicate the multi-layer enclosure wall design will meet all thermal requirements. During SS operation, the interior temperature variation is within ±0.5 K of the target operational temperature, while the heat influx from the exterior TMT environment is 1528 W (extracted by the embedded cold plate). The transient cool-down cycle will take approximately 15 hours to complete and requires the in-situ air handling units to deliver 14KW of cooling power (derated for the TMT site conditions) throughout the interior space of the NFIRAOS ENCL.

Paper Details

Date Published: 9 August 2016
PDF: 12 pages
Proc. SPIE 9908, Ground-based and Airborne Instrumentation for Astronomy VI, 9908A5 (9 August 2016); doi: 10.1117/12.2233633
Show Author Affiliations
Joeleff Fitzsimmons, NRC - Herzberg Astronomy & Astrophysics (Canada)
David Andersen, NRC - Herzberg Astronomy & Astrophysics (Canada)
Jenny Atwood, NRC - Herzberg Astronomy & Astrophysics (Canada)
Peter Byrnes, NRC - Herzberg Astronomy & Astrophysics (Canada)
Glen Herriot, NRC - Herzberg Astronomy & Astrophysics (Canada)
Alexis Hill, NRC - Herzberg Astronomy & Astrophysics (Canada)
Kei Szeto, NRC - Herzberg Astronomy & Astrophysics (Canada)


Published in SPIE Proceedings Vol. 9908:
Ground-based and Airborne Instrumentation for Astronomy VI
Christopher J. Evans; Luc Simard; Hideki Takami, Editor(s)

© SPIE. Terms of Use
Back to Top