Share Email Print
cover

Proceedings Paper

A high-resolution scanning pencil-beam scatterometer: system design challenges
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

The scanning pencil-beam Scatterometer configuration is pretty effective in covering a large ground-swath by rotating a moderately sized paraboloid dish at a moderate speed. For example, Oscat (Oceansat-II Scatterometer) did cover a ground-swath of 1550km using a 1m diameter reflector that was rotated at 20.5 rpm. The decade-long service (1999-2009) provided by the Seawinds instrument onboard the Quikscat mission followed by an almost half-a-decade (2009-2014) service of Oscat has made this configuration tremendously popular with the global user community. A major drawback of conventional pencil-beam systems like Seawinds and Oscat is the relatively poor spatial resolution. The ground-resolution is beamwidth-limited azimuthally while, in elevation, the resolution is improved by engaging pulse-compression and range-binning. Oscat’s Instantaneous Field of View (IFOV) was 25km wide in azimuth (az) and 50km in elevation (el) at 49° incidence angle. The range-compressed resolution bins had dimensions of 6km (el) x 25km (az). Therefore, qualified wind products could be generated upon square grids no finer than 25km x 25km resolution. According to recommendations of International Ocean Vector Wind Science Team (IOVWST) and Oscat user community, high-resolution scatterometry is the requirement of the day with wind-vector cell-size dimension of 5km or better. One way to improve the resolution is to adopt the SAR principle of Range-Doppler discrimination in the scanning pencil-beam configuration. The footprint can be resolved simultaneously in range as well as in azimuth, thus significantly improving the size of the combined Range-Doppler resolution bin (~ 1km). However, the addition of Doppler filtering to conically scanning radar brings with it its own disadvantages e.g. the limitations of dwell time and the constant change in orientation of isodop lines. This paper presents the constraints in system design of high-resolution scanning systems, the design trade-offs, the methods of handling high PRF, the radar pulsing scheme and the achievable resolution.

Paper Details

Date Published: 17 May 2016
PDF: 12 pages
Proc. SPIE 9878, Remote Sensing of the Oceans and Inland Waters: Techniques, Applications, and Challenges, 98780R (17 May 2016); doi: 10.1117/12.2228162
Show Author Affiliations
Prantik Chakraborty, Space Applications Ctr. (India)
Priyanka Gupta, Space Applications Ctr. (India)
Tapan Misra, Space Applications Ctr. (India)


Published in SPIE Proceedings Vol. 9878:
Remote Sensing of the Oceans and Inland Waters: Techniques, Applications, and Challenges
Robert J. Frouin; Satheesh C. Shenoi; K. H. Rao, Editor(s)

© SPIE. Terms of Use
Back to Top