Share Email Print
cover

Proceedings Paper

Possibilities of using pulsed lasers and copper-vapour laser system (CVL and CVLS) in modern technological equipment
Author(s): N. A. Labin; N. A. Bulychev; M. A. Kazaryan; A. G. Grigoryants; I. N. Shiganov; V. I. Krasovskii; V. I. Sachkov; P. S. Plyaka; I. N. Feofanov
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

Research on CVL installations with an average power of 20–25 W of cutting and drilling has shown wide range of applications of these lasers for micromachining of metals and a wide range of non-metallic materials up to 1–2 mm. From the analysis indicated that peak power density in the focused light spot of 10–30 μm diameter must be 109 –1012 W/cm2 the productivity and quality micromachining, when the treatment material is preferably in the evaporative mode micro explosions, followed by the expansion of the superheated vapor and the liquid. To achieve such levels of power density, a minimum heat affected zone (5– 10 μm) and a minimum surface roughness of the cut (1–2 μm), the quality of the output beam of radiation should be as high. Ideally, to ensure the quality of the radiation, the structure of CVL output beam must be single-beam, diffraction divergence and have at duration pulses τi = 20–40 ns. The pulse energy should have low values of 0.1–1 mJ at pulse repetition rates of 10–20 kHz. Axis of the radiation beam instability of the pattern to be three orders of magnitude smaller than the diffraction limit of the divergence. The spot of the focused radiation beam must have a circular shape with clear boundary, and a Gaussian intensity distribution.

Paper Details

Date Published: 15 December 2015
PDF: 5 pages
Proc. SPIE 9810, International Conference on Atomic and Molecular Pulsed Lasers XII, 981016 (15 December 2015); doi: 10.1117/12.2225207
Show Author Affiliations
N. A. Labin, Istok (Russian Federation)
N. A. Bulychev, P.N. Lebedev Physical Institute (Russian Federation)
M. A. Kazaryan, P.N. Lebedev Physical Institute (Russian Federation)
A. G. Grigoryants, Bauman Moscow State Technical Univ. (Russian Federation)
I. N. Shiganov, Bauman Moscow State Technical Univ. (Russian Federation)
V. I. Krasovskii, A. M. Prokhorov General Physics Institute (Russian Federation)
National Research Nuclear Univ. MEPHI (Russian Federation)
V. I. Sachkov, Siberian Physical Technical Institute (Russian Federation)
P. S. Plyaka, Southern Scientific Ctr. (Russian Federation)
I. N. Feofanov, P.N. Lebedev Physical Institute (Russian Federation)


Published in SPIE Proceedings Vol. 9810:
International Conference on Atomic and Molecular Pulsed Lasers XII
Victor F. Tarasenko; Andrey M. Kabanov, Editor(s)

© SPIE. Terms of Use
Back to Top