Share Email Print
cover

Proceedings Paper

Electro-spraying and ultra-violet light curing of polydimethylsiloxane to fabricate thin films for low-voltage dielectric elastomer actuators
Author(s): Florian M. Weiss; Gabor Kovacs; Tino Töpper; Bekim Osmani; Vanessa Y. F. Leung; Bert Müller
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

Currently, dielectric elastomer actuators (DEA) are mainly based on micrometer-thin polymer films and require operating voltages of several hundred volts. In medical applications, however, voltages as low as a few tens of volts are required. To this end, we prepared nanometer-thin dielectric elastomer layers. It is demonstrated that alternating current, electro-spray deposition allows for the fabrication of homogenous, flat, nanometer-thin polydimethylsiloxane (PDMS) films. The growth of the PDMS with average number molecular weights ranging from 800 to 62,700 g/mol, at a constant flow rate of 267 nL/s, was in situ monitored by means of spectroscopic ellipsometry. The Cauchy layer model used for data interpretation may only be applied to flat PDMS layers. Thus, in the present study the droplet morphology was also determined by atomic force microscopy. Spectroscopic ellipsometry does allow for the qualitative determination of the thin film morphology. However, for high molecular weight polymers the precise measurement during deposition is challenging. Independent of the molecular weight, the roughness of the deposited PDMS films considerably smoothens during the ultra-violet radiation treatment. After curing, the electro-sprayed nanometer-thin PDMS films are homogeneous enough to qualify for the fabrication of low-voltage DEA.

Paper Details

Date Published: 15 April 2016
PDF: 9 pages
Proc. SPIE 9798, Electroactive Polymer Actuators and Devices (EAPAD) 2016, 97983C (15 April 2016); doi: 10.1117/12.2220786
Show Author Affiliations
Florian M. Weiss, Swiss Federal Lab. for Materials Science and Technology (Switzerland)
Univ. Basel (Switzerland)
Gabor Kovacs, Swiss Federal Lab. for Materials Science and Technology (Switzerland)
Tino Töpper, Univ. Basel (Switzerland)
Bekim Osmani, Univ. Basel (Switzerland)
Vanessa Y. F. Leung, Univ. Basel (Switzerland)
Bert Müller, Univ. Basel (Switzerland)


Published in SPIE Proceedings Vol. 9798:
Electroactive Polymer Actuators and Devices (EAPAD) 2016
Yoseph Bar-Cohen; Frédéric Vidal, Editor(s)

© SPIE. Terms of Use
Back to Top