Share Email Print
cover

Proceedings Paper

Nondestructive cell evaluation techniques in SOFC stack manufacturing
Author(s): C. Wunderlich
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

Independent from the specifics of the application, a cost efficient manufacturing of solid oxide fuel cells (SOFC), its electrolyte membranes and other stack components, leading to reliable long-life stacks is the key for the commercial viability of this fuel cell technology.

Tensile and shear stresses are most critical for ceramic components and especially for thin electrolyte membranes as used in SOFC cells. Although stack developers try to reduce tensile stresses acting on the electrolyte by either matching CTE of interconnects and electrolytes or by putting SOFC cells under some pressure – at least during transient operation of SOFC stacks ceramic cells will experience some tensile stresses. Electrolytes are required to have a high Weibull characteristic fracture strength. Practical experiences in stack manufacturing have shown that statistical fracture strength data generated by tests of electrolyte samples give limited information on electrolyte or cell quality. In addition, the cutting process of SOFC electrolytes has a major influence on crack initiation.

Typically, any single crack in one the 30 to 80 cells in series connection will lead to a premature stack failure drastically reducing stack service life. Thus, for statistical reasons only 100% defect free SOFC cells must be assembled in stacks. This underlines the need for an automated inspection. So far, only manual processes of visual or mechanical electrolyte inspection are established. Fraunhofer IKTS has qualified the method of optical coherence tomography for an automated high throughput inspection. Alternatives like laser speckle photometry and acoustical methods are still under investigation.

Paper Details

Date Published: 1 April 2016
PDF: 10 pages
Proc. SPIE 9806, Smart Materials and Nondestructive Evaluation for Energy Systems 2016, 980602 (1 April 2016); doi: 10.1117/12.2220399
Show Author Affiliations
C. Wunderlich, Fraunhofer IKTS (Germany)


Published in SPIE Proceedings Vol. 9806:
Smart Materials and Nondestructive Evaluation for Energy Systems 2016
Norbert G. Meyendorf; Theodoros E. Matikas; Kara J. Peters, Editor(s)

Video Presentation

Nondestructive-cell-evaluation-techniques-in-SOFC-stack-manufacturing



© SPIE. Terms of Use
Back to Top