Share Email Print
cover

Proceedings Paper

Numerical study of the influence of picosecond laser spot size on ablated depth and threshold fluence of metal
Author(s): Yiming Zhang; Benjamin Lauer; Beat Neuenschwander; Valerio Romano
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

Picosecond laser systems have been widely used in industrial microprocessing applications since they are a cost-effective tool to achieve high throughput. To better understand the ablation process, firstly the dependence of the ablation depth and the threshold fluence on the laser spot size were determined experimentally by performing ablation with a 10ps pulsed laser system. Further, a 2D axisymmetric model was established to demonstrate the possible mechanism of the phenomena. Three sets of spot radii, namely 15.5μm, 31.5μm and 49.6μm, respectively with equal laser peak fluences ranging from 0.6J/cm2 to 4.5J/cm2 were applied on copper. It was found that the laser ablation depth increases while the threshold fluence decreases with decreasing spot size at identical peak fluence. A 2D axisymmetric thermomechanical model was developed to qualitatively illustrate the mechanism behind these phenomena. The numerical results of the position where the tensile stress exceed to ultimate tensile strength (UTS) of copper show the same trend as the experimental ones. The longitudinal tensile stress was seen to play a more crucial role than the radial tensile/compressive stress on laser ablation process. The impact of the thermal stress on the ablation depth and threshold fluence is derived from the lattice temperature gradient along the surface of the material, leading to spallation and possible modifications of the mechanical properties already at lower laser peak fluences. This is elucidated numerically and analytically. The deviation of the experimental results from the simulation might be attributed to the fact that this simulation model is static. Nevertheless, at low laser fluences, this static approach can provide good explanations of the cold ablation with ultrashort pulsed laser. The limitation of this model is also illustrated.

Paper Details

Date Published: 14 March 2016
PDF: 11 pages
Proc. SPIE 9735, Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XXI, 97350M (14 March 2016); doi: 10.1117/12.2210981
Show Author Affiliations
Yiming Zhang, Berner Fachhochschule Technik und Informatik (Switzerland)
Univ. Bern (Switzerland)
Benjamin Lauer, Berner Fachhochschule Technik und Informatik (Switzerland)
Beat Neuenschwander, Berner Fachhochschule Technik und Informatik (Switzerland)
Valerio Romano, Berner Fachhochschule Technik und Informatik (Switzerland)
Univ. Bern (Switzerland)


Published in SPIE Proceedings Vol. 9735:
Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XXI
Beat Neuenschwander; Stephan Roth; Costas P. Grigoropoulos; Tetsuya Makimura, Editor(s)

© SPIE. Terms of Use
Back to Top