Share Email Print
cover

Proceedings Paper

Correction of Abbe error in involute gear measurement using a laser interferometric system
Author(s): Hu Lin; Zi Xue; Guoliang Yang
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

For correction of Abbe error in involute gear measurement, a laser interferometric measuring system is applied, in this system, the laser beam is split into two paths, one path is arranged tangent to the base circle of gear for measurement of profile, another path is arranged parallel to the gear axis for measurement of helix, two cube-corner reflectors are attached at the end of probe stylus closing to the tip, by this approach, the length offset between probe tip and reference scale is minimized , finally, the Abbe error is decreased. On another hand, the laser measuring error is caused by bending of stylus, the mathematic relationship between amount of bending and probe deflection is deduced. To determine the parameters in this mathematic relationship, two sizes of stylus are used for experiments. Experiments are carried out in a range of ±0.8mm for probe deflection. Results show that the amount of stylus bending is linear with deflection of probe, the laser measuring error caused by stylus bending will be smaller than 0.3μm after correction.

Paper Details

Date Published: 15 October 2015
PDF: 6 pages
Proc. SPIE 9671, AOPC 2015: Advances in Laser Technology and Applications, 96711N (15 October 2015); doi: 10.1117/12.2202556
Show Author Affiliations
Hu Lin, National Institute of Metrology (China)
Zi Xue, National Institute of Metrology (China)
Guoliang Yang, National Institute of Metrology (China)


Published in SPIE Proceedings Vol. 9671:
AOPC 2015: Advances in Laser Technology and Applications
Shibin Jiang; Lijun Wang; Chun Tang; Yong Cheng, Editor(s)

© SPIE. Terms of Use
Back to Top