Share Email Print
cover

Proceedings Paper

Monitoring deformations of industrial objects using optical-electronic autoreflection system
Author(s): Igor A. Konyakhin; Maksim A. Kleshchenok
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

Nowadays, optical-electronics measuring instruments for control the linear deformations in the monitoring industrial constructions (turbines, dams, booms, bases plates, walls, etc) are used effectively. Autocollimating and auto-reflecting schemes are two main basic of such systems. The autocollimating system has larger sensitive than auto reflecting ones. However, the auto reflecting system is more effective for using IR LED as a source and using CCD matrix as a photo-receiver. In addition, the auto-reflecting system has larger working distance than autocollimating system. The experimental test-bed of auto-reflecting system for alignment control was realized. Parameters of a system are the following: IR LED L2656-03 with power 9 mW as sources of radiation; the focal length of autocollimators objective is 250 mm, the matrix change couple devise as photo-receiver with dimension of pixel 2.2μm. The experimental error of this system is 0,007 mm on a working distance of 0.5 m and 0.06 mm on a distance of 8 m.

Paper Details

Date Published: 22 June 2015
PDF: 6 pages
Proc. SPIE 9525, Optical Measurement Systems for Industrial Inspection IX, 95251W (22 June 2015); doi: 10.1117/12.2183604
Show Author Affiliations
Igor A. Konyakhin, ITMO Univ. (Russian Federation)
Maksim A. Kleshchenok, ITMO Univ. (Russian Federation)


Published in SPIE Proceedings Vol. 9525:
Optical Measurement Systems for Industrial Inspection IX
Peter Lehmann; Wolfgang Osten; Armando Albertazzi Gonçalves, Editor(s)

© SPIE. Terms of Use
Back to Top