Share Email Print
cover

Proceedings Paper

Optimization of detonation velocity measurements using a chirped fiber Bragg grating
Author(s): Y. Barbarin; A. Lefrançois; G. Zaniolo; V. Chuzeville; L. Jacquet; S. Magne; J. Luc; A. Osmont
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

Dynamic measurements of detonation velocity profiles are performed using long Chirped Fiber Bragg Gratings (CFBGs). Such thin probes, with a diameter of typically 150 μm, are inserted directly into a high explosive sample or simply positioned laterally. During the detonation, the width of the reflected optical spectrum is continuously reduced by the propagation of the wave-front, which physically shortens the CFBG. The reflected optical intensity delivers a ramp down signal type, which is directly related to the detonation velocity profile. Experimental detonation velocity measurements were performed on the side of three different high explosives (TNT, B2238 and V401) in a bare cylindrical stick configuration (diameter: 2 inches, height: 10 inches). The detonation velocity range covered was 6800 to 9000 m/s. The extraction of the detonation velocity profiles requires a careful calibration of the system and of the CFBG used. A calibration procedure was developed, with the support of optical simulations, to cancel out the optical spectrum distortions from the different optical components and to determine the wavelength-position transfer function of the CFBG in a reproducible way. The 40-mm long CFBGs were positioned within the second half of the three high explosive cylinders. The excellent linearity of the computed position-time diagram confirms that the detonation was established for the three high explosives. The fitted slopes of the position-time diagram give detonation velocity values which are in very good agreement with the classical measurements obtained from discrete electrical shorting pins.

Paper Details

Date Published: 13 May 2015
PDF: 9 pages
Proc. SPIE 9480, Fiber Optic Sensors and Applications XII, 94800S (13 May 2015); doi: 10.1117/12.2176565
Show Author Affiliations
Y. Barbarin, CEA Gramat (France)
A. Lefrançois, CEA Gramat (France)
G. Zaniolo, CEA Gramat (France)
V. Chuzeville, CEA Gramat (France)
L. Jacquet, CEA Gramat (France)
S. Magne, CEA LIST, Lab. Capteurs (France)
J. Luc, CEA Gramat (France)
A. Osmont, CEA Gramat (France)


Published in SPIE Proceedings Vol. 9480:
Fiber Optic Sensors and Applications XII
Gary Pickrell; Eric Udd; Henry H. Du, Editor(s)

© SPIE. Terms of Use
Back to Top