Share Email Print
cover

Proceedings Paper

FTIR emission spectroscopy and modeling of radiative transfer through a layered plume: analysis of aircraft engine exhausts
Author(s): Joerg Heland; Klaus Schaefer; Rainer Haus
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

FTIR-Emission-Spectroscopy detects the thermal radiation of hot exhaust gases, yielding all information about its compounds during one measurement. Apart from the interpretation of smoke stack measurements, FTIR-Emission-Spectroscopy as a remote sensing technique was further developed for analyzing layered plumes, especially aircraft exhausts in a program of the German Science Foundation (DFG) on the effect of air traffic on the environment. The measurements shall be used as input data for model calculations and to validate the extrapolated emission data at flight altitude. The evaluation of the spectra with respect to the gas composition contains a line-by-line calculation of the transmittances of several layers of the exhaust plume (temperature- and concentration-gradients) followed by the radiative transfer through the medium towards the detector. The spectral input data are taken from the HITRAN 92 database. After the spectroscopic determination of the plume temperature and its profile from the CO2-band around 2400 cm-1, one obtains the total mass of the single gas species in the field of view of the spectrometer. Comparing the measured data for CO2 with the theoretical emission index from ideal stoichiometric combustion, one obtains the emission indices for the other measured species. Knowing the fuel consumption of the engine, one gets the emission rates of the compounds in g/s. Several engine types, old fashioned engines (no bypass) and modern JT8 and CFM56 bypass engines at different thrust levels have been analyzed. H2O, CO2, CO, and NO concentrations can be derived immediately from the measurements right behind the nozzle exits, where the temperature profile is known to be homogeneous. The retrieval of the measured data far behind the nozzle exit uses the multilayer plume model. Formaldehyde and other hydrocarbon species are seen in the spectra and shall be implemented in the computer code. Apart from future applications for the turbine development and the engine-status control after a certain flight time, this remote sensing system can deliver emission data of aircraft engines and the temperature decay of the exhaust plumes at all altitudes.

Paper Details

Date Published: 31 May 1995
PDF: 9 pages
Proc. SPIE 2365, Optical Sensing for Environmental and Process Monitoring, (31 May 1995); doi: 10.1117/12.210786
Show Author Affiliations
Joerg Heland, Fraunhofer Institute for Atmospheric Environmental Research (Germany)
Klaus Schaefer, Fraunhofer Institute for Atmospheric Environmental Research (Germany)
Rainer Haus, Fraunhofer Institute for Atmospheric Environmental Research (Germany)


Published in SPIE Proceedings Vol. 2365:
Optical Sensing for Environmental and Process Monitoring
Orman A. Simpson, Editor(s)

© SPIE. Terms of Use
Back to Top