Share Email Print
cover

Proceedings Paper

Influence of technology on FLIR waveband selection
Author(s): Herbert M. Runciman
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

The choice of waveband for thermal imaging depends not only on the characteristics of the target, background and atmosphere, but on imager parameters such as electron storage capacity per pixel, frame rate, optical transmission, cold-shield efficiency and non-uniformity. This paper outlines the ways in which the conventional trade-offs of sensitivity against imager and scene parameters are modified when electron storage capacity and non-uniformity are taken into account. In the presence of these limitations, the emphasis is frequently on optimizing image contrast rather than signal level or even photon-limited signal/noise ratio (SNR), resulting in more severe degradations due to equipment limitations such as transmission of hot windows or cold-shield inefficiency, and in reduced spectral bandwidths for optimum sensitivity. The dependence of sensitivity on cut-off wavelength is illustrated for a range of imager parameters, and the benefits of cooled or pseudo-cooled spectral filters are discussed. Optimum cut-off wavelength, particularly in the 3 - 5 micrometers (MWIR) band is found to depend strongly on system parameters. Comparisons are made between scanning and staring systems. In the 8 - 12 micrometers (LWIR) band scanning systems can compete well with staring arrays for equivalent frame rates, but improvements in multiplexer technology to give higher storage capacity or faster read-out will increasingly favor staring systems for all bands.

Paper Details

Date Published: 22 May 1995
PDF: 12 pages
Proc. SPIE 2470, Infrared Imaging Systems: Design, Analysis, Modeling, and Testing VI, (22 May 1995); doi: 10.1117/12.210045
Show Author Affiliations
Herbert M. Runciman, Pilkington Optronics (United Kingdom)


Published in SPIE Proceedings Vol. 2470:
Infrared Imaging Systems: Design, Analysis, Modeling, and Testing VI
Gerald C. Holst, Editor(s)

© SPIE. Terms of Use
Back to Top