Share Email Print
cover

Proceedings Paper

Solving next generation (1x node) metrology challenges using advanced CDSEM capabilities: tilt, high energy and backscatter imaging
Author(s): Xiaoxiao Zhang; Patrick W. Snow; Alok Vaid; Eric Solecky; Hua Zhou; Zhenhua Ge; Shay Yasharzade; Ori Shoval; Ofer Adan; Ishai Schwarzband; Maayan Bar-Zvi
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

Traditional metrology solutions are facing a range of challenges at the 1X node such as three dimensional (3D) measurement capabilities, shrinking overlay and critical dimension (CD) error budgets driven by multi-patterning and via in trench CD measurements. Hybrid metrology offers promising new capabilities to address some of these challenges but it will take some time before fully realized. This paper explores new capabilities currently offered on the in-line Critical Dimension Scanning Electron Microscope (CD-SEM) to address these challenges and enable the CD-SEM to move beyond measuring bottom CD using top down imaging.

Device performance is strongly correlated with Fin geometry causing an urgent need for 3D measurements. New beam tilting capabilities enhance the ability to make 3D measurements in the front-end-of-line (FEOL) of the metal gate FinFET process in manufacturing. We explore these new capabilities for measuring Fin height and build upon the work communicated last year at SPIE1. Furthermore, we extend the application of the tilt beam to the back-end-of-line (BEOL) trench depth measurement and demonstrate its capability in production targeting replacement of the existing Atomic Force Microscope (AFM) measurements by including the height measurement in the existing CDSEM recipe to reduce fab cycle time.

In the BEOL, another increasingly challenging measurement for the traditional CD-SEM is the bottom CD of the self-aligned via (SAV) in a trench first via last (TFVL) process. Due to the extremely high aspect ratio of the structure secondary electron (SE) collection from the via bottom is significantly reduced requiring the use of backscatter electrons (BSE) to increase the relevant image quality. Even with this solution, the resulting images are difficult to measure with advanced technology nodes. We explore new methods to increase measurement robustness and combine this with novel segmentation-based measurement algorithm generated specifically for BSE images. The results will be contrasted with data from previously used methods to quantify the improvement. We also compare the results to electrical test data to evaluate and quantify the measurement performance improvements.

Lastly, according to International Technology Roadmap for Semiconductors (ITRS) from 2013, the overlay 3 sigma requirement will be 3.3 nm in 2015 and 2.9 nm in 2016. Advanced lithography requires overlay measurement in die on features resembling the device geometry. However, current optical overlay measurement is performed in the scribe line on large targets due to optical diffraction limit. In some cases, this limits the usefulness of the measurement since it does not represent the true behavior of the device. We explore using high voltage imaging to help address this urgent need. Novel CD-SEM based overlay targets that optimize the restrictions of process geometry and SEM technique were designed and spread out across the die. Measurements are done on these new targets both after photolithography and etch. Correlation is drawn between the two measurements. These results will also be compared to conventional optical overlay measurement approaches and we will discuss the possibility of using this capability in high volume manufacturing.

Paper Details

Date Published: 19 March 2015
PDF: 14 pages
Proc. SPIE 9424, Metrology, Inspection, and Process Control for Microlithography XXIX, 94240G (19 March 2015); doi: 10.1117/12.2087267
Show Author Affiliations
Xiaoxiao Zhang, GLOBALFOUNDRIES Inc. (United States)
Patrick W. Snow, GLOBALFOUNDRIES Inc. (United States)
Alok Vaid, GLOBALFOUNDRIES Inc. (United States)
Eric Solecky, GLOBALFOUNDRIES Inc. (United States)
Hua Zhou, Applied Materials, Inc. (United States)
Zhenhua Ge, Applied Materials, Inc. (United States)
Shay Yasharzade, Applied Materials, Inc. (United States)
Ori Shoval, Applied Materials Israel (Israel)
Ofer Adan, Applied Materials Israel (Israel)
Ishai Schwarzband, Applied Materials Israel (Israel)
Maayan Bar-Zvi, Applied Materials Israel (Israel)


Published in SPIE Proceedings Vol. 9424:
Metrology, Inspection, and Process Control for Microlithography XXIX
Jason P. Cain; Martha I. Sanchez, Editor(s)

© SPIE. Terms of Use
Back to Top