Share Email Print
cover

Proceedings Paper

Understanding the impact of CD-SEM artifacts on metrology via experiments and simulations
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

Scanning Electron Microscopy (SEM) is widely used to measure Critical Dimensions (CD) in semiconductor lithography processes. Correlation between the CD-SEM metrology and target profile has drawing attention from metrology community [1]. In this paper, we use a recently developed CD-SEM simulator [2-3] to investigate some artifacts of SEM metrology. The simulation consists of two parts. First part is a stochastic resist modeling for lines and spaces through pitch, exposure dose and focus. Second part is CD-SEM simulation. Both CD and LWR extracted from experimental CD-SEM images were used to train the SEM model. Two types of artifacts were found to be metrology dependent: the first artifact is that a CD-SEM measures CD at various heights across pitch for the same SEM threshold. The second artifact is a misleading CD measurement for trenches not fully developed. By overlapping the CD-SEM simulation with 3D lithography simulation, correlation between CD-SEM metrology and target 3D profile is studied. Finally, a Process Window (PW) analysis based on both experiment and simulation is presented, using the simulated features and SEM images to correct the experimental PW.

Paper Details

Date Published: 19 March 2015
PDF: 12 pages
Proc. SPIE 9424, Metrology, Inspection, and Process Control for Microlithography XXIX, 94242A (19 March 2015); doi: 10.1117/12.2087106
Show Author Affiliations
Chao Fang, KLA-Tencor Texas (United States)
Alessandro Vaglio Pret, KLA-Tencor Corp. (United States)
Mark D. Smith, KLA-Tencor Corp. (United States)
John J. Biafore, KLA-Tencor Corp. (United States)
Stewart A. Robertson, KLA-Tencor Corp. (United States)
Joost Bekaert, IMEC (Belgium)


Published in SPIE Proceedings Vol. 9424:
Metrology, Inspection, and Process Control for Microlithography XXIX
Jason P. Cain; Martha I. Sanchez, Editor(s)

© SPIE. Terms of Use
Back to Top