Share Email Print
cover

Proceedings Paper

Adhesion promoters for large scale fabrication of dielectric elastomer stack transducers (DESTs) made of pre-fabricated dielectric films
Author(s): T. Grotepaß; F. Förster-Zügel; H. Mößinger; H. F. Schlaak
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

Multilayer dielectric elastomer stack transducers (DESTs) are a promising new transducer technology with many applications in different industry sectors, like medical devices, human-machine-interaction, etc. Stacked dielectric elastomer transducers show larger thickness contraction driven by lower voltages than transducers made from a single dielectric layer. Traditionally multilayered DESTs are produced by repeatedly cross-linking a liquid elastomeric pre-polymer into the required shape. Our recent research focusses on a novel fabrication method for large scale stack transducers with a surface area over 200 x 300 mm by processing pre-fabricated elastomeric thin films of less than 50 μm thicknesses. The thin films are provided as two- or three-layer composites, where the elastomer is sandwiched between one or two sacrificial liners. Separating the elastomeric film from the residual layers and assembling them into dielectric elastomer stack transducers poses many challenges concerning adhesion, since the dielectric film merely separates from the liner if the adhesive forces between them are overcome. Conversely, during the assembly of a dielectric elastomer stack transducer, adhesive forces have to be established between two elastomeric layers or between the dielectric and the electrode layer. The very low Young's modulus of at least one adhesion partner requires suitable means of increasing the adhesive forces between the different adhesive layers of a dielectric elastomer stack transducer to prevent a delamination of the transducer during its lifetime. This work evaluates different surface activation treatments - corona, low-pressure plasma and UV-light - and their applicability in the production of large scale DESTs made from pre-fabricated elastomeric films.

Paper Details

Date Published: 1 April 2015
PDF: 9 pages
Proc. SPIE 9430, Electroactive Polymer Actuators and Devices (EAPAD) 2015, 94302O (1 April 2015); doi: 10.1117/12.2084244
Show Author Affiliations
T. Grotepaß, Technische Univ. Darmstadt (Germany)
F. Förster-Zügel, Technische Univ. Darmstadt (Germany)
H. Mößinger, Technische Univ. Darmstadt (Germany)
H. F. Schlaak, Technische Univ. Darmstadt (Germany)


Published in SPIE Proceedings Vol. 9430:
Electroactive Polymer Actuators and Devices (EAPAD) 2015
Yoseph Bar-Cohen, Editor(s)

© SPIE. Terms of Use
Back to Top