Share Email Print

Proceedings Paper

Lamb wave propagation in vibrating structures for effective health monitoring
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

Lamb wave based Structural Health Monitoring (SHM) has received much attention during the past decades for its broad coverage and high sensitivity to damage. Lamb waves can be used to locate and quantify damage in static structures successfully. Nonetheless, structures are usually subjected to various external vibrations or oscillations. Not many studies are reported in the literature concerning the damage detecting ability of Lamb wave in oscillating structures which turns out to be a pivotal issue in the practical application of the SHM technique. For this reason in this study, the propagating capability of Lamb waves in a vibrating thin aluminum plate is examined experimentally. Two circular shaped piezoelectric wafer active transducers are surface-bonded on the aluminum plate where one acted as an actuator and another as a sensor. An arbitrary waveform generator is connected to the actuator for the generation of a windowed tone burst on the aluminum plate. An oscilloscope is connected to the sensor for receiving the traveled waves. An external shaker is used to generate out-of-plane external vibration on the plate structure. Time of flight (TOF) is a crucial parameter in most Lamb wave based SHM studies, which measures wave traveling time from the actuator to sensor. In the present study the influence of the external vibrations on the TOF is investigated. Experiments are performed under different boundary conditions of the plate, such as free-free and fixed by gluing. The effects of external vibrations in the frequency range between 10 Hz to 1000 Hz are analyzed. Comparisons are carried out between the resulting Lamb wave signals from the vibrating plate for different boundary conditions. Experimental results show that the external vibrations in relatively low frequency range do not change the TOF during the application of Lamb wave based SHM.

Paper Details

Date Published: 23 March 2015
PDF: 10 pages
Proc. SPIE 9438, Health Monitoring of Structural and Biological Systems 2015, 94381Z (23 March 2015); doi: 10.1117/12.2083931
Show Author Affiliations
Xubin Lu, Nanyang Technological Univ. (Singapore)
Chee Kiong Soh, Nanyang Technological Univ. (Singapore)
Panduranga Vittal Avvari, Nanyang Technological Univ. (Singapore)

Published in SPIE Proceedings Vol. 9438:
Health Monitoring of Structural and Biological Systems 2015
Tribikram Kundu, Editor(s)

© SPIE. Terms of Use
Back to Top