Share Email Print

Proceedings Paper

Active edge control in the precessions polishing process for manufacturing large mirror segments
Author(s): Hongyu Li; Wei Zhang; David Walker; Gouyo Yu
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

The segmentation of the primary mirror is the only promising solution for building the next generation of ground telescopes. However, manufacturing segmented mirrors presents its own challenges. The edge mis-figure impacts directly on the telescope’s scientific output. The ‘Edge effect’ significantly dominates the polishing precision. Therefore, the edge control is regarded as one of the most difficult technical issues in the segment production that needs to be addressed urgently. This paper reports an active edge control technique for the mirror segments fabrication using the Precession's polishing technique. The strategy in this technique requires that the large spot be selected on the bulk area for fast polishing, and the small spot is used for edge figuring. This can be performed by tool lift and optimizing the dell time to compensate for non-uniform material removal at the edge zone. This requires accurate and stable edge tool influence functions. To obtain the full tool influence function at the edge, we have demonstrated in previous work a novel hybrid-measurement method which uses both simultaneous phase interferometry and profilometry. In this paper, the edge effect under ‘Bonnet tool’ polishing is investigated. The pressure distribution is analyzed by means of finite element analysis (FEA). According to the ‘Preston’ equation, the shape of the edge tool influence functions is predicted. With this help, the multiple process parameters at the edge zone are optimized. This is demonstrated on a 200mm crosscorners hexagonal part with a result of PV less than 200nm for entire surface.

Paper Details

Date Published: 2 September 2014
PDF: 7 pages
Proc. SPIE 9280, 7th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Large Mirrors and Telescopes, 928007 (2 September 2014); doi: 10.1117/12.2069790
Show Author Affiliations
Hongyu Li, Harbin Institute of Technology (China)
Wei Zhang, Harbin Institute of Technology (China)
David Walker, Univ. College London (United Kingdom)
OpTIC-Glyndŵr (United Kingdom)
Zeeko Ltd. (United Kingdom)
Gouyo Yu, Univ. College London (United Kingdom)
OpTIC-Glyndŵr (United Kingdom)

Published in SPIE Proceedings Vol. 9280:
7th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Large Mirrors and Telescopes
Wenhan Jiang; Myung K. Cho; Fan Wu, Editor(s)

© SPIE. Terms of Use
Back to Top