Share Email Print
cover

Proceedings Paper

Enhancing carrier injection in the active region of a 280nm emission wavelength LED using graded hole and electron blocking layers
Author(s): Bilal Janjua; Tien K. Ng; Ahmed Y. Alyamani; Munir M. El-Desouki; Boon S. Ooi
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

A theoretical investigation of AlGaN UV-LED with band engineering of hole and electron blocking layers (HBL and EBL, respectively) was conducted with an aim to improve injection efficiency and reduce efficiency droop in the UV LEDs. The analysis is based on energy band diagrams, carrier distribution and recombination rates (Shockley-Reed-Hall, Auger, and radiative recombination rates) in the quantum well, under equilibrium and forward bias conditions. Electron blocking layer is based on AlaGa1-aN / Alb → cGa1-b → 1-cN / AldGa1-dN, where a < d < b < c. A graded layer sandwiched between large bandgap AlGaN materials was found to be effective in simultaneously blocking electrons and providing polarization field enhanced carrier injection. The graded interlayer reduces polarization induced band bending and mitigates the related drawback of impediment of holes injection. Similarly on the n-side, the Alx → yGa1-x → 1-yN / AlzGa1-zN (x < z < y) barrier acts as a hole blocking layer. The reduced carrier leakage and enhanced carrier density in the active region results in significant improvement in radiative recombination rate compared to a structure with the conventional rectangular EBL layers. The improvement in device performance comes from meticulously designing the hole and electron blocking layers to increase carrier injection efficiency. The quantum well based UV-LED was designed to emit at 280nm, which is an effective wavelength for water disinfection application.

Paper Details

Date Published: 27 February 2014
PDF: 9 pages
Proc. SPIE 9003, Light-Emitting Diodes: Materials, Devices, and Applications for Solid State Lighting XVIII, 90030S (27 February 2014); doi: 10.1117/12.2039347
Show Author Affiliations
Bilal Janjua, King Abdullah Univ. of Science and Technology (Saudi Arabia)
Tien K. Ng, King Abdullah Univ. of Science and Technology (Saudi Arabia)
Ahmed Y. Alyamani, King Abdulaziz City for Science and Technology (Saudi Arabia)
Munir M. El-Desouki, King Abdulaziz City for Science and Technology (Saudi Arabia)
Boon S. Ooi, King Abdullah Univ. of Science and Technology (Saudi Arabia)


Published in SPIE Proceedings Vol. 9003:
Light-Emitting Diodes: Materials, Devices, and Applications for Solid State Lighting XVIII
Klaus P. Streubel; Heonsu Jeon; Li-Wei Tu; Martin Strassburg, Editor(s)

© SPIE. Terms of Use
Back to Top