Share Email Print

Proceedings Paper

Design and fabrication of sub-wavelength annular apertures on fiber tip for femtosecond laser machining
Author(s): Yen-Chun Tung; Ming-Han Chung; I-Hui Sung; Chih-Kung Lee
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

Adopting optical technique to pursue micromachining must make a compromise between the focal spot sizes the depth of focus. The focal spot size determines the minimum features can be fabricated. On the other hand, the depth of focus influences the ease of alignment in positioning the fabrication light beam. A typical approach to bypass the diffraction limit is to adopt the near-field approach, which has spot size in the range of the optical fiber tip. However, the depth of focus of the emitted light beam will be limited to tens of nanometers in most cases, which posts a difficult challenge to control the distance between the optical fiber tip and the sample to be machined optically. More specifically, problems remained in this machining approach, which include issues such as residue induced by laser ablation tends to deposit near the optical fiber tip and leads to loss of coupling efficiency. We proposed a method based on illuminating femtosecond laser through a sub-wavelength annular aperture on metallic film so as to produce Bessel light beam of sub-wavelength while maintaining large depth of focus first. To further advance the ease of use in one such system, producing sub-wavelength annular aperture on a single mode optical fiber head with sub-wavelength focusing ability is detailed. It is shown that this method can be applied in material machining with an emphasis to produce high aspect ratio structure. Simulations and experimental results are presented in this paper.

Paper Details

Date Published: 7 March 2014
PDF: 6 pages
Proc. SPIE 8973, Micromachining and Microfabrication Process Technology XIX, 89730M (7 March 2014); doi: 10.1117/12.2039148
Show Author Affiliations
Yen-Chun Tung, National Taiwan Univ. (Taiwan)
Ming-Han Chung, National Taiwan Univ. (Taiwan)
I-Hui Sung, National Taiwan Univ. (Taiwan)
Chih-Kung Lee, National Taiwan Univ. (Taiwan)

Published in SPIE Proceedings Vol. 8973:
Micromachining and Microfabrication Process Technology XIX
Mary Ann Maher; Paul J. Resnick, Editor(s)

© SPIE. Terms of Use
Back to Top