Share Email Print

Proceedings Paper

Key techniques of ultra-precision aerostatic system
Author(s): Dongsheng Li; Jiafu Li; Ting Cui; Jiacheng Hu; Yang Cheng; Meibao Wang
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

In the process of ultra-precision machining and measuring, nanoscale rotary and linear motion can be realized by aerostatic system. Aerostatic restrictors are one of core components in aerostatic system. An aerostatic restrictor with multi-micro channels was designed and developed, combined with the orifice and torus throttling methods. Besides, the mentioned restrictor has two individual parts assembled together by interference fit, which can alleviating the contradiction between its stiffness and stability. Its maximum bearing capacity was 708.4N when the supply gas pressure was 0.5MPa. Numerical simulation and experimental investigation indicates the pressure in gas film of this restrictor gradually reduces to atmospheric pressure from the center to the surrounding. The temperature decreases from the outlet to the edge and the maximum temperature difference is more than 5℃, which verifies Joule-Thomson effect in the throttling process. In order to reduce the influence of gas source fluctuation on the parameters such as gas film thickness, pressure and temperature, high accuracy stable pressure source was developed applying two-stage series closed-loops feedback control, which can make the outlet pressure error below 1%. Because of the influence of ambient noise on ultra-precision aerostatic system, high precision vibration-isolation platform was developed applying air spring vibration-isolation technology, whose natural frequency can be as low as 1.22Hz.

Paper Details

Date Published: 10 October 2013
PDF: 12 pages
Proc. SPIE 8916, Sixth International Symposium on Precision Mechanical Measurements, 89163A (10 October 2013); doi: 10.1117/12.2035787
Show Author Affiliations
Dongsheng Li, China Jiliang Univ. (China)
Jiafu Li, China Jiliang Univ. (China)
Ting Cui, China Jiliang Univ. (China)
Jiacheng Hu, China Jiliang Univ. (China)
Yang Cheng, China Jiliang Univ. (China)
Meibao Wang, China Jiliang Univ. (China)

Published in SPIE Proceedings Vol. 8916:
Sixth International Symposium on Precision Mechanical Measurements
Shenghua Ye; Yetai Fei, Editor(s)

© SPIE. Terms of Use
Back to Top