Share Email Print
cover

Proceedings Paper

Accurate measurement of LED lens surface temperature
Author(s): Indika U. Perera; Nadarajah Narendran; Yi-wei Liu
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

Radiant power emitted by high power light-emitting diodes (LEDs) have been steadily increasing over the past decade. High radiation, especially short wavelength, can increase the temperature and negatively affect the primary lens performance of high-power LEDs. In this regards, assessment of lens temperature during operation is important. Past studies have shown large errors when thermocouples are used for measuring temperature in high radiant flux environments. Therefore, the objective of this study was to understand the problem in using thermocouples to measure LED lens surface temperature and to find a solution to improving the measurement accuracy. A laboratory study was conducted to better understand the issue. Results showed that most of the error is due to absorption of visible radiant energy by the thermocouple. In this study, the measurements made using an infrared (IR) thermal imaging system were used as the reference temperature because the IR imaging system is unaffected by radiant flux in the visible range. After studying the thermocouple wire metallurgy and its radiation absorption properties, a suitable material was identified to shield the thermocouple from visible radiation. Additionally, a silicone elastomer was used to maintain the thermal interface between the lens surface and the thermocouple junction bead. With these precautions, the lens temperature measurements made using the J-type thermocouple and the IR imaging system matched very well.

Paper Details

Date Published: 30 September 2013
PDF: 6 pages
Proc. SPIE 8835, LED-based Illumination Systems, 883506 (30 September 2013); doi: 10.1117/12.2023091
Show Author Affiliations
Indika U. Perera, Rensselaer Polytechnic Institute (United States)
Nadarajah Narendran, Rensselaer Polytechnic Institute (United States)
Yi-wei Liu, Rensselaer Polytechnic Institute (United States)


Published in SPIE Proceedings Vol. 8835:
LED-based Illumination Systems
Jianzhong Jiao, Editor(s)

© SPIE. Terms of Use
Back to Top