Share Email Print
cover

Proceedings Paper

A high thermal resistance MEMS-based Pirani vacuum sensor chip
Author(s): Florian Dams; Rupert Schreiner
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

The performance of thermal conductivity vacuum gauges can be improved by a well-designed geometry. The lower measurement range limit is determined by the size of the active sensing area and the thermal conduction heat losses through the supporting structures. The upper measurement range is limited by the distance between the heated element and the cold reference plane. Silicon based MEMS-technology gives the possibility to fabricate both sensing structures with suitable areas out of low thermal conductive materials and narrow gaps in order to extend the measurement range in both directions. In this work we present a MEMS-process to fabricate high thermal resistance sensor structures. The rectangular sensitive areas are anchored by four beams and are structured out of low thermal conductive PECVD-siliconnitride films with 1 µm in thickness. The metallic heating structure is completely embedded in the SiN-layer. Both sensitive area and its support beams were released from the silicon bulk material by anisotropic underetching. In this way a free-supporting structure with a gap of 150 μm to the silicon substrate was formed. The influence of the filament geometry and temperature was systematically investigated to determine the properties of the chips as thermal conductivity vacuum gauges. The temperature of the sensitive area was held constant by a self-balancing bridge circuit and the heating power was measured by a Δ-Σ-ADC. The average solid state thermal conductivity is in the order of 106WK1. The measuring range of the most sensitive structures covers 8 orders of magnitude from 105 mbar to 1000mbar.

Paper Details

Date Published: 17 May 2013
PDF: 8 pages
Proc. SPIE 8763, Smart Sensors, Actuators, and MEMS VI, 87630P (17 May 2013); doi: 10.1117/12.2017345
Show Author Affiliations
Florian Dams, Regensburg Univ. of Applied Sciences (Germany)
Rupert Schreiner, Regensburg Univ. of Applied Sciences (Germany)


Published in SPIE Proceedings Vol. 8763:
Smart Sensors, Actuators, and MEMS VI
Ulrich Schmid; José Luis Sánchez de Rojas Aldavero; Monika Leester-Schaedel, Editor(s)

© SPIE. Terms of Use
Back to Top