Share Email Print
cover

Proceedings Paper

Additive manufacturing of photopolymers using the Texas Instruments DLP lightcrafter
Author(s): M. Hatzenbichler; M. Geppert; R. Seemann; J. Stampfl
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

The use of the Texas Instruments DLP® LightCrafterTM as a compact module in lithography-based additive manufacturing technologies (AMT) is discussed in this paper. For this purpose the light engine is placed underneath a transparent vat which is coated with a PTFE-film and filled with photosensitive resin. By loading an appropriate bitmap into the light engine, the resin can be exposed selectively to obtain a photopolymerized layer. To integrate the device into the building process, a configurable I/O trigger is required since the loaded bitmap should be exposed only in a certain period (exposure time). By stacking up the individual layers with a typical layer thickness between 25 and 50μm, a three-dimensional part is built up. The current setup of the used digital LEDs in combination with a customized optical projection system ensures a spatial and temporal homogeneity of the intensity at the build platform, which is significantly better than with traditionally used engines. It could be shown that this system can fabricate threedimensional parts with a resolution < 40μm in x-y plane and 15μm in z-axis. Additionally, mechanical properties (e.g. bending strength) were measured and potential anisotropies, which might be caused by the layered manufacturing process, were assessed. Ceramic-filled polymers were also used and the necessary post-processing steps like the removal of the polymer phase after structuring and the final sintering step to obtain fully dense ceramic parts are discussed.

Paper Details

Date Published: 8 March 2013
PDF: 8 pages
Proc. SPIE 8618, Emerging Digital Micromirror Device Based Systems and Applications V, 86180A (8 March 2013); doi: 10.1117/12.2001651
Show Author Affiliations
M. Hatzenbichler, Technische Univ. Wien (Austria)
M. Geppert, FOTEC Forschungs- und Technologietransfer GmbH (Austria)
R. Seemann, FOTEC Forschungs- und Technologietransfer GmbH (Austria)
J. Stampfl, Technische Univ. Wien (Austria)


Published in SPIE Proceedings Vol. 8618:
Emerging Digital Micromirror Device Based Systems and Applications V
Michael R. Douglass; Patrick I. Oden, Editor(s)

© SPIE. Terms of Use
Back to Top