Share Email Print

Proceedings Paper

Phase-shift mask issues for 193-nm lithography
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

As feature sizes below 0.25 micron are pursued deep-UV lithography at 193 nm is being investigated. This paper presents results from investigations into phase-shift mask issues for 193 nm excimer laser lithography. A small field refractive projection system for operation at the 193.3 nm wavelength of a spectrally narrowed ArF excimer laser has been constructed for lithographic research. The small field, 20X system operates with a variable objective lens numerical aperture from 0.30 to 0.60, variable partial coherence, and control over illumination fill. Through the use of attenuated and alternating phase-shifting techniques resolution can be pushed to the 0.2 micron range with depth of focus as large as 2 microns. Sensitivities to shifter deviations and resist interaction increase. Shifter etch influences on fused silica surface characteristics need to be addressed. Transmission affects of attenuating materials becomes increasingly important. Resist imaging and simulation results presented shed some light on the potential of phase-shift masking for 193 nm lithography, along with inherent difficulties.

Paper Details

Date Published: 17 May 1994
PDF: 10 pages
Proc. SPIE 2197, Optical/Laser Microlithography VII, (17 May 1994); doi: 10.1117/12.175414
Show Author Affiliations
Bruce W. Smith, Rochester Institute of Technology (United States)
Suleyman Turgut, Rochester Institute of Technology (United States)

Published in SPIE Proceedings Vol. 2197:
Optical/Laser Microlithography VII
Timothy A. Brunner, Editor(s)

© SPIE. Terms of Use
Back to Top