Share Email Print
cover

Proceedings Paper

Process window analysis of the ARC and TAR systems for quarter-micron optical lithography
Author(s): Hiroshi Yoshino; Takeshi Ohfuji; Naoaki Aizaki
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

A practical process window, considering the standing wave effect, was investigated for anti-reflective coating (ARC) and top anti- reflector (TAR) in KrF excimer laser lithograph, using an accurate profile simulator. The practical process window was defined on the exposure/defocus plane as the area where two process windows at the resist thicknesses corresponding to maximum and minimum linewidths on a swing curve are overlapped. ARC and TAR thickness latitude values for optimized ARC and TAR refractive indexes are also discussed. Simulation results show that the practical process window for the TAR system is wider than that for the ARC system, since the sidewall angle decreases by the use of ARC. Although TAR thickness latitude is smaller than that for ARC, the TAR system has an advantage in regard to reliable device fabrication, considering both the practical process window and the thickness latitude.

Paper Details

Date Published: 16 May 1994
PDF: 10 pages
Proc. SPIE 2195, Advances in Resist Technology and Processing XI, (16 May 1994); doi: 10.1117/12.175341
Show Author Affiliations
Hiroshi Yoshino, NEC Corp. (Japan)
Takeshi Ohfuji, NEC Corp. (Japan)
Naoaki Aizaki, NEC Corp. (Japan)


Published in SPIE Proceedings Vol. 2195:
Advances in Resist Technology and Processing XI
Omkaram Nalamasu, Editor(s)

© SPIE. Terms of Use
Back to Top