Share Email Print
cover

Proceedings Paper

Monitoring of the railway bridge over the Arno River
Author(s): F. Cianfrone; Renzo Medeot
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

The bridge over the Arno River built in the late 1980s, located at the boundary of a seismic zone, has been instrumented with a large number of transducers of different types, for a total of 354 measuring points. The variables monitored are: vertical load on the bedrock, stresses and temperatures in the concrete, inclinations of the piers, vertical load on the bearings, and displacements in the expansion joints. The installation of the transducers was carried out simultaneously with the different phases of the erection of the structure and the values of the monitored variables were measured throughout the period of construction and the following two years of service. Measurement data, analyzed and compared to design data, permitted the acquisition of important information on the actual process of concrete curing and the settling in of the structure, both under the influence of job site operations and the ensuing normal service loads.

Paper Details

Date Published: 1 May 1994
PDF: 15 pages
Proc. SPIE 2193, Smart Structures and Materials 1994: Passive Damping, (1 May 1994); doi: 10.1117/12.174110
Show Author Affiliations
F. Cianfrone, FIP Industriale (Italy)
Renzo Medeot, FIP Industriale (Italy)


Published in SPIE Proceedings Vol. 2193:
Smart Structures and Materials 1994: Passive Damping
Conor D. Johnson, Editor(s)

© SPIE. Terms of Use
Back to Top