Share Email Print
cover

Proceedings Paper

High heat flux mirror design for an undulator beamline
Author(s): Thomas W. Tonnessen; Steven E. Fisher; Frank M. Anthony; David L. Lunt; Ali M. Khounsary; Kevin J. Randall; Efim S. Gluskin; Wenbing Yun
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

A-high-heat-load, horizontally deflecting/focusing mirror is designed for installation on an APS undulator beamline. The main design objective has been to keep the total tangential RMS slope error, including the thermally induced component, to less than 2 (mu) rad with an absorbed beam power on the mirror of 2 kW and a peak flux of 3.2 W/mm2. Extensive examination of various design parameters and detailed thermal/structural analyses has resulted in a mirror design that meets the tight slope-error requirement. Design features include a silicon substrate, a tailored pin-post cooling scheme, a moderate coolant flow rate, primary and secondary cooling areas, a multi-strip coating on the reflecting surface, and inlet/outlet cooling manifolds through an attached Ni-Fe mounting structure.

Paper Details

Date Published: 12 November 1993
PDF: 14 pages
Proc. SPIE 1997, High Heat Flux Engineering II, (12 November 1993); doi: 10.1117/12.163827
Show Author Affiliations
Thomas W. Tonnessen, Rockwell Power Systems (United States)
Steven E. Fisher, Rockwell Power Systems (United States)
Frank M. Anthony, FMA Associates Inc. (United States)
David L. Lunt, Photon Sciences, Inc. (United States)
Ali M. Khounsary, Argonne National Lab. (United States)
Kevin J. Randall, Argonne National Lab. (United States)
Efim S. Gluskin, Argonne National Lab. (United States)
Wenbing Yun, Argonne National Lab. (United States)


Published in SPIE Proceedings Vol. 1997:
High Heat Flux Engineering II
Ali M. Khounsary, Editor(s)

© SPIE. Terms of Use
Back to Top