Share Email Print
cover

Proceedings Paper

Testing of plasma facing materials for divertors in the JET neutral-beam test bed
Author(s): Hans Dieter Falter; Dragoslav Ciric; P. Massmann; Antonio Cardella; Masato Akiba
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

Flat Beryllium tiles brazed to actively cooled CuCrZr withstand power densities up to 17 MW/m2. Tiles with 2 mm thickness have been cycled for 1000 pulses at power densities between 12 and 14 MW/m2. Flat CFC tiles brazed to OFHC copper failed at power densities of 13 MW/m2 with long (10 s) pulses. The fault developed from an area which showed signs of overheating from the start of the test and led to a complete detachment of one tile. For shorter pulse duration (2.5 s) higher power densities (17 MW/m2) could be applied. CFC cubes brazed around a central cooling pipe (monoblocks) have been tested to 15 MW/m2. The power density was limited by the peak surface temperature of the tiles, which exceeded 1500 - 2000 degree(s)C. None of the tiles failed during the test, but there were considerable temperature variations from tile to tile.

Paper Details

Date Published: 12 November 1993
PDF: 12 pages
Proc. SPIE 1997, High Heat Flux Engineering II, (12 November 1993); doi: 10.1117/12.163798
Show Author Affiliations
Hans Dieter Falter, JET Joint Undertaking (United Kingdom)
Dragoslav Ciric, JET Joint Undertaking (United Kingdom)
P. Massmann, JET Joint Undertaking (United Kingdom)
Antonio Cardella, Max-Planck-Institut fuer Plasma Physik (Germany)
Masato Akiba, Japan Atomic Energy Research Institute (Japan)


Published in SPIE Proceedings Vol. 1997:
High Heat Flux Engineering II
Ali M. Khounsary, Editor(s)

© SPIE. Terms of Use
Back to Top